10 Pcs CAT40 45 Degree Pull Stud Retention Knob for HAAS CAT 40 CNC Tool Holder Replace CNC Lathe Accessories
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 132,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Prioriteetti (3,00 €) | to 3. - ti 8. syys
Myyjä: WuLinshop
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Yhteenveto
- Size:About 2.2in/57mm long
- Features: Conical: CAT 40, A: 45, D1 Knob: 0.589, D2 Neck: 0.392 inch, D3 Hole: N/A, D4 Aircraft: 0.6360 inch, L code: 2.250 inch, L1: 0.988 inch, L2 Front distance: 1.264 inch, knob slot: RKW40.
- In addition to the VQC 20/40, the fixed knob is suitable for most mazak cnc cat40
- Suitable for Amura-Seiki,for Fadal, for comet, for Daewoo, for Dah Lih, for Hass, for Howa Kogyo, for Ikegal, for Kearny-Trecker, for Kia, for Kitamura, for Mitsubishi, for Miyano, for OKK, for Okuma Howa, for Roku-Roka, for Toshiba, for Toyoda, for YCI, for Sharp
- cnc pull studs
10 Pcs CAT40 45 Degree Pull Stud Retention Knob for HAAS CAT 40 CNC Tool Holder Replace CNC Lathe Accessories Kuvaus
Size:About 2.2in/57mm long
Features: Conical: CAT 40, A: 45, D1 Knob: 0.589, D2 Neck: 0.392 inch, D3 Hole: N/A, D4 Aircraft: 0.6360 inch, L code: 2.250 inch, L1: 0.988 inch, L2 Front distance: 1.264 inch, knob slot: RKW40.
In addition to the VQC 20/40, the fixed knob is suitable for most mazak cnc cat40
Suitable for Amura-Seiki,for Fadal, for comet, for Daewoo, for Dah Lih, for Hass, for Howa Kogyo, for Ikegal, for Kearny-Trecker, for , for Kitamura, for , for Miyano, for OKK, for Okuma Howa, for -Roka, for , for Toyoda, for YCI, for
Colour: silver
Material: steel
Package Contents:
10 * 45 degree pull stud fixing knobs
Tiedot
| OPC | PPSNTG8 |
|---|---|
| Brändi | Melitt |
| Koodit | 6031550841267 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 6cm |
|---|---|
| Width | 5cm |
| Length | 12cm |
| Weight | 0.6715kg |
| Colour | silver |
| Material | steel |
Vertaile myyjiä tuotteelle 10 Pcs CAT40 45 Degree Pull Stud Retention Knob for HAAS CAT 40 CNC Tool Holder Replace CNC Lathe Accessories
- Uusi alkaen 50,45 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(173 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
47,45 €
|
+3,00 € Delivery
Arvioitu toimitus:
3-8 syys
|
50,45 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset