2PCS for ESP32 C3 Development Board with 0.42inch OLED Display for ESP32 Supports WiFi
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 134,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (Ilmainen) | pe 2. - ke 7. loka
Myyjä: Papishop
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Yhteenveto
- The ESP32 C3 development board has a built-in 0.42 inch OLED display and a ceramic antenna, a Type-C USB interface, a reset button and a start button, making it easy and quick to use.
- Low-power dual-mode Wi-Fi and Bluetooth chip, equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency. Low power consumption saves energy.
- for ESP32-C3 can be developed with the ESP development framework, including common development environments such as MicroPython and for Arduino. The product is suitable for the Internet of Things, smart homes, sensor networks and other areas, with good scalability and extensive software support.
- For ESP32-C3 supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), has 4MB onboard flash memory.
- Integrated with USB serial port full-speed controller, 15 x GPIO pins allow flexible configuration of pin functions.
2PCS for ESP32 C3 Development Board with 0.42inch OLED Display for ESP32 Supports WiFi Kuvaus
The ESP32 C3 development board has a built-in 0.42 inch OLED display and a ceramic antenna, a Type-C USB interface, a reset button and a start button, making it easy and quick to use.
Low-power dual-mode Wi-Fi and chip, equipped with RISC-V 32-bit single-core processor, to 160MHz main frequency. Low power consumption saves .
for ESP32-C3 can be developed with the ESP development framework, including common development environments such as MicroPython and for . The product is suitable for the Internet of Things, homes, sensor networks and other areas, with good scalability and extensive software support.
For ESP32-C3 supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), has 4MB onboard flash memory.
Integrated with USB serial port full-speed controller, 15 x GPIO pins allow flexible configuration of pin functions.
Color: As Shown
Material: PCB
Package Contents:
2 x ESP32 C3 development board
Tiedot
| OPC | PVPG5QM |
|---|---|
| Brändi | Typecat |
| Koodit | 6033949122063 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 9cm |
| Weight | 0.011kg |
| Colour | As Shown |
| Material | PCB |
Vertaile myyjiä tuotteelle 2PCS for ESP32 C3 Development Board with 0.42inch OLED Display for ESP32 Supports WiFi
- Uusi alkaen 21,99 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(436 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
21,99 €
|
+Free Delivery
Arvioitu toimitus:
2-7 loka
|
21,99 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset