2PK Upgraded 0.25/0.4MM Hotend Nozzle for Flashforge AD5X Quick-Detachable Nozzle Extruder Quick Release Nozzle
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 134,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Prioriteetti (Ilmainen) | ti 29. syys - la 3. loka
Myyjä: LLhappy
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Yhteenveto
- Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you!
- Notice: The upgraded nozzle kit only works for the printer purchased after 31st May, 2025. It needs to use the upgraded screws and radiator when you install it on the printer purchased before 31st May, 2025.
- Compatible Printer: This 0.25MM 0.4MM hotend upgraded nozzle kit is compatible with for Flashforge AD5X printer.
- Quick-Detachable: Integrated throat heating block which is easy to replace and improves the success rate of printing models.
- All-metal design: It is high-temperature resistant up to 300℃. It's compatible with for filaments like PLA/ABS/PETG/TPU/PP/PC/Nylon, etc.
2PK Upgraded 0.25/0.4MM Hotend Nozzle for Flashforge AD5X Quick-Detachable Nozzle Extruder Quick Release Nozzle Kuvaus
Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you!
Notice: The upgraded nozzle kit only works for the printer purchased after 31st May, 2025. It needs to use the upgraded screws and radiator when you install it the printer purchased before 31st May, 2025.
Compatible Printer: This 0.25MM 0.4MM hotend upgraded nozzle kit is compatible with for Flashforge AD5X printer.
Quick-Detachable: Integrated throat heating block which is easy to replace and improves the success rate of printing models.
All-metal design: It is high-temperature resistant to 300. It's compatible with for filaments like PLA/ABS/PETG/TPU/PP/PC/Nylon, etc.
Color: As Shown
Material: Metal
Package Contents:
2 * nozzle
Tiedot
| OPC | PX2MB9P |
|---|---|
| Brändi | Zandonà |
| Koodit | 6031722787492 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 1cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.0225kg |
| Colour | As Shown |
| Material | Metal |
Vertaile myyjiä tuotteelle 2PK Upgraded 0.25/0.4MM Hotend Nozzle for Flashforge AD5X Quick-Detachable Nozzle Extruder Quick Release Nozzle
- Uusi alkaen 28,79 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(175 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
28,79 €
|
+Free Priority Delivery
Arvioitu toimitus:
29 syys - 3 loka
|
28,79 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset