2X 16 Channel 12V Relay Module with Optocoupler Low Level Trigger Expansion Board for Raspberry Pi
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 129,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (4,12 €) | ma 3. - pe 7. elo
Myyjä: Papishop
Palautukset: 30 päivää
180 päivän maksuturva
Suosituimmat tuotteet kategoriassa Tapettiliimat
Yhteenveto
- It is an isolated 12V 10A relay module with 16 channels, each relay can be switched on and off individually via opto-isolated digital input. The standard interface can be directly connected to microcontrollers and controlled by a variety of microcontrollers such as for Arduino, AVR, PIC, ARM, DSP, etc.
- Equipped with high current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; opto-isolator tripping current: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling insulation, tripping more reliable, more stable.
- EASY INSTALLATION: Equipped with screwed terminal plate and fixed screw holes (diameter: 3.1mm) on both sides for easy installation.
- With indicator LEDs for relay output status. The working status indicator lights up to ensure safe use.
2X 16 Channel 12V Relay Module with Optocoupler Low Level Trigger Expansion Board for Raspberry Pi Kuvaus
It is an isolated 12V 10A relay module with 16 channels, each relay can be switched and off individually via opto-isolated digital input. The standard interface can be directly connected to microcontrollers and controlled by a variety of microcontrollers such as for , AVR, , ARM, DSP, etc.
Equipped with high current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; opto-isolator tripping current: 5mA.
RELIABLE: Fault-tolerant design, even if the control breaks, the relay will not move; With optical coupling insulation, tripping more reliable, more stable.
EASY INSTALLATION: Equipped with screwed terminal plate and fixed screw holes (diameter: 3.1mm) both sides for easy installation.
With indicator LEDs for relay output status. The working status indicator lights to ensure safe use.
Colour:
Material:pcb
Package Contents:
2 x Relay Module
Tiedot
| OPC | PWKFFFH |
|---|---|
| Brändi | Typecat |
| Koodit | 6032451619573 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 6cm |
|---|---|
| Width | 8cm |
| Length | 18cm |
| Weight | 0.391kg |
| Colour | Blue |
| Material | Pcb |
Vertaile myyjiä tuotteelle 2X 16 Channel 12V Relay Module with Optocoupler Low Level Trigger Expansion Board for Raspberry Pi
- Uusi alkaen 40,12 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(436 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
36,00 €
|
+4,12 € Delivery
Arvioitu toimitus:
3-7 elo
|
40,12 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset