2X for MKS TMC2209 Stepper Motor Driver StepStick 3D Printer Parts 2.0A UART Ultra Silent Replace TMC2208
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 131,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (11,10 €) | ke 19. - ti 25. elo
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- 1. Continuing the characteristics of the TMC series driver, it has good mute effect and expands the internal 16 to 256 subdivisions in the chip.
- 2. The driving current is larger, the maximum peak current can reach 2.5A, and the stable printing current can reach up to 1.8A.
- 3. Compared with other TMC series drivers, the heating efficiency is lower and the heat dissipation effect is better.
- 4. Supports UART mode, perfect for use with MKS SGEN-L, no jumpers required.
- 5. When plugging in the drive, be sure to orient the connector correctly to avoid reversing the polarity and damaging the drive.
2X for MKS TMC2209 Stepper Motor Driver StepStick 3D Printer Parts 2.0A UART Ultra Silent Replace TMC2208 Kuvaus
1. Continuing the characteristics of the TMC series driver, it has good mute effect and expands the internal 16 to 256 subdivisions in the chip.
2. The driving current is larger, the maximum current can reach 2.5A, and the stable printing current can reach to 1.8A.
3. Compared with other TMC series drivers, the heating efficiency is lower and the heat dissipation effect is better.
4. Supports UART mode, perfect for use with MKS SGEN-L, no jumpers required.
5. When plugging in the drive, be sure to the connector correctly to avoid reversing the polarity and damaging the drive.
Default current: 1.25a
Maximum current: 2.5a
Logic voltage: 3.3v/5v
Input voltage: 5.5V-28v
Subdivision: to 1/256
Mode: dir/step,uart
Colour:Black
Material:PCB+Metal
Package Contents:
2x Drive module
2x Heat sink
Tiedot
| OPC | PV9BMCH |
|---|---|
| Koodit | 4713667872984 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 6cm |
|---|---|
| Width | 9cm |
| Length | 12cm |
| Weight | 0.016kg |
| Colour | Black |
| Material | PCB+Metal |
Vertaile myyjiä tuotteelle 2X for MKS TMC2209 Stepper Motor Driver StepStick 3D Printer Parts 2.0A UART Ultra Silent Replace TMC2208
- Uusi alkaen 23,07 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(133 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
11,97 €
|
+11,10 € Delivery
Arvioitu toimitus:
19-25 elo
|
23,07 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset