2X Guitar Bridge Pins Puller Pulling Remover Extractor Tool with 4 Pack Guitar Saddle Nut and 24 Pack Guitar Bridge Pins

2X Guitar Bridge Pins Puller Pulling Remover Extractor Tool with 4 Pack Guitar Saddle Nut and 24 Pack Guitar Bridge Pins Kuvaus

Function: the guitar removal tool is designed to pull bridge pin directly without damaging your guitar; And the bridge pins are small and exquisite, useful replacement parts for guitars
Durable guitar puller: the bridge pin puller is made of good quality alloy; It is and portable, a nice accessory for your guitar, easy to use
Suitable range: the guitar puller fits most standard bridge pins, serving as the puller, extractor and removal tool for replacing bridge pins of acoustic guitar
Guitar bridge pins: 31 mm in length and 8 mm in diameter of its' Suitable for acoustic classical guitar, folk guitar, ukulele, or

How to Replace Guitar Saddle
Take the pins, strings, saddle out in order;
Check the saddle's thickness, polish the saddle if it is thicker;
Make sure that saddle will not fall off when the guitar is reversed;
Mark the position the guitar bridge;
Check the saddle height, polish the saddle if it is higher;
Make sure the right , recommended height of string is about:
LowE= 0.125 inch (3mm), HighE= 0.08 inch (2mm).
How to Replace Guitar Nut
Clean the nut and guitar neck with a knife or tool;
Kick the nut off the neck with a hammer or screwdriver;
Pull the nut out with a tweezer;
Check the nut's thickness, polish the nut if it is thicker;
Put nut in slot, recommended space is about: LowE= 0.01 inch (0.25mm), HighE= 0.005 inch (0.15mm);
Mark the redundant length of nut, and polish them off.
Colour:3 color(Black + silver + Creamy white)
Material:Metal+ABS

Package Contents:
2 x guitar bridge pin puller,
4 x guitar saddle,
4 x guitar nut,
12 x ivory guitar bridge pins
12 x black guitar bridge pins