Sorry, this item is temporarily out of stock.
2X LED Flashing Finger Tip Gyroscope DIY Electronic Kit 51 Microcontroller Circuit Board Welding Assemble Components
Samankaltaiset tuotteet, joista uskomme sinun pitävän
Would you like us to let you know when it's back?
Yhteenveto
- The spinning top is a gadget that has beenanded down from ancient times to today. The flash electronic top is a novel electronic ythat combines modern technology and tradition. It not only retains the primitive connotation of the top, but also reflects the attractive charm of modern electronic technology.
- The gyro uses a single chip microcomputer to control 12 light-emitting diodes to flash in turn. The flashing time of each LED and the flashing sequence are controlled by the single-chip microcomputer. When the electronic gyroscope rotates, the corresponding pattern and text will appear.
- In order to improve the stability of patterns and characters, adopts Hall IC to control the regular display of the pattern, that is, every time it rotates, the Hall IC senses the magnet, and then the model is fed back to the microcontroller.
- The coin-cell battery is used for power supply, and the microcontroller automatically enters low power consumption when the battery gyro is turned off. When the switch is pressed, the LED is turned on.
- Welding Assemble Component
2X LED Flashing Finger Tip Gyroscope DIY Electronic Kit 51 Microcontroller Circuit Board Welding Assemble Components Kuvaus
The top is a gadget that has beenanded down from ancient times to today. The flash electronic top is a novel electronic ythat combines modern technology and tradition. It not only retains the primitive connotation of the top, but also reflects the attractive charm of modern electronic technology.
The gyro uses a single chip microcomputer to control 12 light-emitting diodes to flash in turn. The flashing of each LED and the flashing sequence are controlled by the single-chip microcomputer. When the electronic gyroscope rotates, the corresponding pattern and text will appear.
In order to improve the stability of patterns and characters, adopts Hall IC to control the regular display of the pattern, that is, every it rotates, the Hall IC senses the magnet, and then the model is fed back to the microcontroller.
The coin-cell battery is used for power supply, and the microcontroller automatically enters low power consumption when the battery gyro is turned off. When the is pressed, the LED is turned .
Product name:two-page LED fingertip gyro DIY production kit
Product model:TJ-56-307
Working voltage:DC6V (two 2032 button batteries)
Product size:79x26x11mm
Color:As Shown
Material:Metal+Plastic
Package Contents:
2 x Finger Tip Gyroscope DIY Kit
Tiedot
| OPC | PW7ZVJB |
|---|---|
| Koodit | 6032651112652 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 4cm |
|---|---|
| Width | 6cm |
| Length | 9cm |
| Weight | 0.054kg |
| Colour | As Shown |
| Material | Metal+Plastic |