Tuotekuvat
2X Motherboard for RP2040 Raspberry Pi Core Board Compatible RP2 Raspberry Pi Micropython Multifunction Module,A
Uusi
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 126,000 arvostelua arvosanalla “Erinomainen”
10,91 €
14,03 €
Alennus 22%!
ILMAINEN toimitus
1%
Mitä on välitön Cashback?
Lue lisää
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (Ilmainen) | ma 22. - la 27. kesä
Myyjä: paras
Palautukset: 30 päivää
180 päivän maksuturva
Suosituimmat tuotteet kategoriassa Emolevyt
Kuvaus ja tiedot
Yhteenveto
- The RP2040 microprocessor (MCU) integrates a dual-core ARM architecture Cotex-MO+ core, directly integrates 264KB of RAM internally, supports up to 16M QSPI external expansion Flash, and highly flexible I/O settings, including I2C, SPI, PIO (Programmable I/O).
- Dual-core ARM Cortex-M0+@ 133MHz, 264kB built-in SRAM distributed in 6 independent blocks, Max external QSPI Flash expansion, directly connected to the AHB bus, equipped Complete interpolator and integer divider, on-chip programmable LDO to generate core voltage, 2 on-chip PLL phase-locked loops for USB and core clock generation, 30 GPIO pins, 4 of which can be used as analog inputs.
- Peripherals: 2 serial ports/2 SPI/2 I2C/16PWM channels/USB 1.1 controller and PHY, supports host mode and slave mode/8 PIO state machine. Regarding the YD-RP2040 core board, YD-RP2040 is a core board circuit board produced by VCC-GND® Studio using the RP2040 microprocessor (MCU) issued by the British for Raspberry Pi Company. It is convenient for users to expand peripherals and design and build circuits.
- Light-emitting diode description: Power indicator light, red light, used to indicate power on status, USR LED, GPIO25, blue light, used for user programming control, RGB LED WS2812B, GPIO23, used for user programming control
- Key description: USR KEY, GPIO24, used for user programming input control BOOT KEY, used for boot download RST KEY: used to reset the system, or enter boot download mode with BOOT KEY
2X Motherboard for RP2040 Raspberry Pi Core Board Compatible RP2 Raspberry Pi Micropython Multifunction Module,A Kuvaus
The RP2040 microprocessor (MCU) integrates a dual-core ARM architecture Cotex-MO+ core, directly integrates 264KB of RAM internally, supports to 16M QSPI external expansion Flash, and highly flexible I/O settings, including I2C, SPI, PIO (Programmable I/O).
Dual-core ARM Cortex-M0+@ 133MHz, 264kB built-in distributed in 6 independent blocks, Max external QSPI Flash expansion, directly connected to the AHB bus, equipped Complete interpolator and integer divider, -chip programmable LDO to generate core voltage, 2 -chip PLL phase-locked loops for USB and core clock generation, 30 GPIO pins, 4 of which can be used as analog inputs.
Peripherals: 2 serial /2 SPI/2 I2C/16PWM channels/USB 1.1 controller and PHY, supports host mode and slave mode/8 PIO state machine. Regarding the YD-RP2040 core board, YD-RP2040 is a core board circuit board produced by VCC-GND Studio using the RP2040 microprocessor (MCU) issued by the British for Raspberry Pi Company. It is convenient for users to expand peripherals and design and build circuits.
Light-emitting diode description: Power indicator light, red light, used to indicate power status, USR LED, GPIO25, light, used for user programming control, RGB LED WS2812B, GPIO23, used for user programming control
Key description: USR KEY, GPIO24, used for user programming input control BOOT KEY, used for boot download RST KEY: used to reset the system, or enter boot download mode with BOOT KEY
Description:
About the advantages of using RP2040 chip
for Raspberry Pi, with its extremely cost-effective for Raspberry Pi computer board, has become one of the leading computer data manufacturers. Cost-effectiveness has always been the label of Raspberry Pi. It can simply be considered an unfamiliar controller. The performance index is high enough and the necessary peripherals are also ava
Tiedot
| OPC | PT8GCFP |
|---|---|
| Koodit | 6031151882539 (EAN) |
Tuotetiedot
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.014kg |
| Colour | As Shown |
| Size | 4MB no RGB |
| Material | PCB |
Vertaile myyjiä tuotteelle 2X Motherboard for RP2040 Raspberry Pi Core Board Compatible RP2 Raspberry Pi Micropython Multifunction Module,A
- Uusi alkaen 10,91 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(245 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
10,91 €
|
+Free Delivery
Arvioitu toimitus:
22-27 kesä
|
10,91 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset