2X PS1248G 12V 4A 48W Gigabit PoE Splitter with High Quality

2X PS1248G 12V 4A 48W Gigabit PoE Splitter with High Quality Kuvaus

PS1248G 4Pairs High-Power active splitters enable data terminals that were not originally designed to accept power
from the Ethernet, to be powered by Power over Ethernet
midspans. The PDAS- PS1248-4P High Power splitter can power devices such as WiMAX CPEs, small WiMAX
base-stations, 802.11n Access-Points, Thin- Clients, PTZ (Pan/Tilt/Zoom) IP Cameras, Video-Phones and more.

Moreover, such devices might only accept voltage levels lower than the PoE standard minimum voltage (44v in IEEE802.3af / 50v in 802.3at). Using the PS1248-4P high power splitter, these terminals immediately become PoE-ready without any modification required their side. The splitter is identified as a powered device (PD) in front of the powering Midspan and after being detected and powered, it physically splits the data and power streams, arriving over a single cable, into wo separate cords (LAN & ) which go directly to the data terminal. Voltage regulation is also performed to the level required by the terminal .
Connectors: 2 x RJ-45, shielded, EIA 568A and 568B Jacks unit: 5.5X2.1mm
Data Rate: 10/100/1000
Input voltage: 44 - 57 Vdc
Input power: 60W max
Output power: 51W max
Output Current: 4.2A@12V
Indicators :Output Power Indicators: Green LED Environmental Operating Temp: -20 to 40 Celsius
Storage Temp: -30 to 70 Celsius
Operating Humidity: 10% to 90%, non-condensing
Storage Humidity: 5% to 95%, non-condensing
colour:black
material:metal
size:8 x 6.2 x 2.7 Cm

Package Contents:
2xPS1248G Gigabit POE splitter