Tuotekuvat
Sorry, this item is temporarily out of stock.
2X Waveshare 2.9 Inch E-Ink Display Local Refresh 296X128 Resolution SPI Communication Interface for Raspberry Pi 4
New
Would you like us to let you know when it's back?
Kuvaus ja tiedot
Yhteenveto
- No backlight, power can be a long time to maintain the display of the last screen
- Very low power consumption, basically only on refresh
- SPI control interface, can access for Raspberry Pi/Jetson Nano/Arduino/STM32 and other main control board
- Onboard level conversion chip, compatible with 3.3V and 5V microcontroller interface
- Provide complete information manual (for Raspberry Pi/Jetson Nano/Arduino/STM32 and other sample programs)
2X Waveshare 2.9 Inch E-Ink Display Local Refresh 296X128 Resolution SPI Communication Interface for Raspberry Pi 4 Kuvaus
No backlight, power can be a long to maintain the display of the last screen
Very low power consumption, basically only refresh
SPI control interface, can access for Raspberry Pi/Jetson //STM32 and other main control board
Onboard level conversion chip, compatible with 3.3V and 5V microcontroller interface
Provide complete information manual (for Raspberry Pi/Jetson //STM32 and other sample programs)
Specification
Working voltage: 3.3V/5V
Communication interface: 3-wire SPI, 4-wire SPI
Dimensions: 89.5x 38mm
Display size: 66.89 x 29.05mm
Resolution: 296 x 128pixels
Display color: black and white
Gray level: 2
Partial refresh: 0.3S
Refresh power consumption: 26.4mW(typ.)
Sleep current: Less than 0.01uA (close to 0)
Viewing angle: Greater than 170
color:
Material: Plastic+Metal
Package Contents:
2 x Display
2 x 20cm Connection Cable
Tiedot
| OPC | PXWGQVW |
|---|---|
| Koodit | 4712271107840 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 4cm |
|---|---|
| Width | 8cm |
| Length | 11cm |
| Weight | 0.082kg |
| Colour | blue |
| Material | Plastic+Metal |