3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 127,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (2,00 €) | ma 13. - la 18. heinä
Palautukset: 30 päivää
180 päivän maksuturva
Suosituimmat tuotteet kategoriassa Tulostimen muistimoduulit
Yhteenveto
- UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port on the computer and acts as a serial-line for the CAN bus interface.
- With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface on Linux.
- The UCAN adapter is compatible with ARM-based embedded platforms such as for Raspberry Pi, for Raspberry Pi Zero, for ODROID, for BeagleBone, etc. At the same time, it can also be used as USB to CAN application on Klipper.
- supports CANable
- 3D Printer UCAN Board
3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware Kuvaus
UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port the computer and acts as a serial- for the CAN bus interface.
With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface Linux.
The UCAN adapter is compatible with ARM-based embedded platforms such as for Raspberry Pi, for Raspberry Pi Zero, for ODROID, for BeagleBone, etc. At the same , it can also be used as USB to CAN application Klipper.
Based STM32F072
Type-C USB socket
Supports CAN2.0A and B, baud rates to 1M
Compatible with CANable
Support with for CAnable / CandleLight / Klipper firmware
3-pin screw terminal: CANH, CANL, GND
Jumper to enter bootloader for firmware updates
Onboard 120R termination default or Jumper to enable/disable termination
type: UCAN Board
color:Black+green
Material:PCB+plastic+metal
Package Contents:
1 x UCAN Board
Tiedot
| OPC | PT8G5C5 |
|---|---|
| Koodit | 6032150384352 (EAN) |
Tuotetiedot
| Height | 2cm |
|---|---|
| Width | 2cm |
| Length | 7cm |
| Weight | 0.008kg |
| Colour | Black&green |
| Material | PCB+plastic+metal |
Vertaile myyjiä tuotteelle 3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware
- Uusi alkaen 17,10 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(111 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
15,10 €
|
+2,00 € Delivery
Arvioitu toimitus:
13-18 heinä
|
17,10 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset