4-Pack BTS7960 43A H-Bridge Motor Driver - High-Power Motor Controller with Current Limiting/Overheat Protection
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 139,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (2,00 €) | ti 1. - to 3. joulu
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Yhteenveto
- The module provides 5V isolation from the MCU to effectively protect it and features an on - board 5V power indicator.
- It has a voltage indication for the motor driver output end and allows for the soldering of a heat sink.
- Only four lines (GND, 5V, PWM1, PWM2) are needed from the MCU to the driver module, and the isolation chip can share the 5V power supply with the MCU.
- It can reverse the motor's direction, supports two PWM inputs with a frequency up to 25kHz, and has two error signal outputs for heat flow.
- The isolation chip's 5V power supply can either be shared with the MCU's 5V or use the on - board 5V supply, and the supply voltage ranges from 5.5V to 27V.
4-Pack BTS7960 43A H-Bridge Motor Driver - High-Power Motor Controller with Current Limiting/Overheat Protection Kuvaus
The module provides 5V isolation from the MCU to effectively protect it and features an - board 5V power indicator.
It has a voltage indication for the motor driver output end and allows for the soldering of a heat sink.
Only four lines (GND, 5V, PWM1, PWM2) are needed from the MCU to the driver module, and the isolation chip can share the 5V power supply with the MCU.
It can reverse the motor's direction, supports two PWM inputs with a frequency to 25kHz, and has two error signal outputs for heat flow.
The isolation chip's 5V power supply can either be shared with the MCU's 5V or use the - board 5V supply, and the supply voltage ranges from 5.5V to 27V.
Color: As Shown
Material: PCB
Package Contents:
4*BTS7960 Motor Driver
Tiedot
| OPC | PVPWJKQ |
|---|---|
| Brändi | Semoic |
| Koodit | 4712271142551 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 5cm |
|---|---|
| Width | 17cm |
| Length | 18cm |
| Weight | 0.26kg |
| Colour | As Shown |
| Material | PCB |
Customers also buy
Vertaile myyjiä tuotteelle 4-Pack BTS7960 43A H-Bridge Motor Driver - High-Power Motor Controller with Current Limiting/Overheat Protection
- Uusi alkaen 43,14 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(291 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
41,14 €
|
+2,00 € Delivery
Arvioitu toimitus:
1-3 joulu
|
43,14 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset



