5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 129,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (4,12 €) | ma 3. - pe 7. elo
Myyjä: Papishop
Palautukset: 30 päivää
180 päivän maksuturva
Suosituimmat tuotteet kategoriassa TV-satelliitti-monitoimikytkimet
Yhteenveto
- The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
- You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
- This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
- Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
- Microphone Module
5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi Kuvaus
The microphone is a single mono element. You can select whether you want it to be the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick two microphones!
You can set them to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it ! This microphone is best used with Cortex M-series chips like the for Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Color:
Material: Plastic+Metal
Package Contents:
5 x Microphone Module
Tiedot
| OPC | PWN22PK |
|---|---|
| Brändi | Typecat |
| Koodit | 6031711563571 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 5cm |
|---|---|
| Width | 1cm |
| Length | 1cm |
| Weight | 0.0075kg |
| Colour | Blue |
| Material | Plastic+Metal |
Vertaile myyjiä tuotteelle 5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
- Uusi alkaen 39,57 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(436 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
35,45 €
|
+4,12 € Delivery
Arvioitu toimitus:
3-7 elo
|
39,57 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset