CNC Direct Current Stabilized Voltage Power Supply 20A 1200W Constant Voltage Constant Current Repairing Step-Down Plate
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 127,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (3,00 €) | to 9. - ti 14. heinä
Myyjä: BALURE
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- 1. Solid material, input adopts a common-mode inductor, significantly reduce the impact of the input power supplys wavenumber, to achieve low wavenumber output.
- 2. Intelligent temperature control design, fan with large area heat sink, with superior heat dissipation effect.
- 3. Output voltage can be set by dip switch, with the fixed voltage output of 5/9/12/24/36/48/60V.
- 4. And the base plate can be used independently, the output current of 0-20A, the back of the base plate with true value table.
- 5. Low-cost communication power supplys, through a TTL to 485 module or WIFI module, it can realize the remotely controls of multiple machines, a separate base board can realize communication control, low-cost solution.
CNC Direct Current Stabilized Voltage Power Supply 20A 1200W Constant Voltage Constant Current Repairing Step-Down Plate Kuvaus
1. Solid material, input adopts a common-mode inductor, significantly reduce the impact of the input power supplys wavenumber, to achieve low wavenumber output.
2. Intelligent temperature control design, fan with large area heat sink, with superior heat dissipation effect.
3. Output voltage can be set by dip , with the fixed voltage output of 5/9/12/24/36/48/60V.
4. And the base plate can be used independently, the output current of 0-20A, the back of the base plate with true value table.
5. Low-cost communication power supplys, through a TTL to 485 module or WIFI module, it can realize the remotely controls of multiple machines, a separate base board can realize communication control, low-cost solution.
Colour:As Shown
Material:PCB+electronic components
Size:XY-6020L base plate:about 72x109x42mm/2.83x4.29x1.65in
Package Contents:
1 * Step-down Plate
Tiedot
| OPC | PVB6PHN |
|---|---|
| Brändi | Jojomino |
| Koodit | 4712458392830 (EAN) |
Tuotetiedot
| Height | 4cm |
|---|---|
| Width | 10cm |
| Length | 14cm |
| Weight | 0.218kg |
| Colour | As Shown |
| Material | PCB+electronic components |
Vertaile myyjiä tuotteelle CNC Direct Current Stabilized Voltage Power Supply 20A 1200W Constant Voltage Constant Current Repairing Step-Down Plate
- Uusi alkaen 30,75 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(337 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
27,75 €
|
+3,00 € Delivery
Arvioitu toimitus:
9-14 heinä
|
30,75 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset