Cnc Engraving Machine Control Board 3 Axes for Grbl 1.1F V3.4 Usb Diy Small Engraver Controller
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 128,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (3,50 €) | to 23. - ti 28. heinä
Myyjä: Kulemip
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- Offline engineering: GRBL1.1f firmware is adopted, with stable performance. Optional offline module to realize offline tool setting and engraving. Directly enter the picture for engraving, without programming and design, simple and convenient
- Adjustable power: PWM or TTL signal control is supported, and the power is adjustable between 0-100%. The spindle supports 0-100% adjustable PWM power. Enhanced spindle drive can support 20000rpm spindle
- Stable overcurrent protection: provide overcurrent protection for stepper motor to avoid damage, upgrade integrated stepper motor drive, 2A high current, high stability. Add power button switch
- Good heat dissipation: professional shell protection, fan active heat dissipation, will not heat for a long time. Add fan ports to force cooling, add enclosures to protect the control panel during transportation and avoid short circuit problems during use
- Short circuit protection function: cancel the drive module, use the integrated imported stepper motor to drive, with short circuit protection, integrated heat dissipation aluminum alloy
Cnc Engraving Machine Control Board 3 Axes for Grbl 1.1F V3.4 Usb Diy Small Engraver Controller Kuvaus
Offline engineering: GRBL1.1f firmware is adopted, with stable performance. Optional offline module to realize offline tool setting and engraving. Directly enter the picture for engraving, without programming and design, simple and convenient
Adjustable power: PWM or TTL signal control is supported, and the power is adjustable between 0-. The spindle supports 0- adjustable PWM power. Enhanced spindle drive can support 20000rpm spindle
Stable overcurrent protection: provide overcurrent protection for stepper motor to avoid damage, upgrade integrated stepper motor drive, 2A high current, high stability. Add power button
Good heat dissipation: professional shell protection, fan active heat dissipation, will not heat for a long . Add fan to force cooling, add enclosures to protect the control panel during transportation and avoid short circuit problems during use
Short circuit protection function: cancel the drive module, use the integrated imported stepper motor to drive, with short circuit protection, integrated heat dissipation aluminum alloy
Colour:black
Material:pcb
Package Contents:
1 x CNC Control Board
Tiedot
| OPC | PVMY59N |
|---|---|
| Brändi | Semoic |
| Koodit | 4714182831593 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 9cm |
|---|---|
| Width | 11cm |
| Length | 15cm |
| Weight | 0.19kg |
| Colour | Black |
| Material | pcb |
Vertaile myyjiä tuotteelle Cnc Engraving Machine Control Board 3 Axes for Grbl 1.1F V3.4 Usb Diy Small Engraver Controller
- Uusi alkaen 44,44 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(131 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
40,94 €
|
+3,50 € Delivery
Arvioitu toimitus:
23-28 heinä
|
44,44 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset