Tuotekuvat
Sorry, this item is temporarily out of stock.
DC3.5V-5V 5W Mono Audio Amplifier Decoder Board Supports TWS Pair TYPE-C Interface Electronic Component Kit
New
Samankaltaiset tuotteet, joista uskomme sinun pitävän
Would you like us to let you know when it's back?
Kuvaus ja tiedot
Yhteenveto
- After getting the Bluetooth board, refer to the wiring diagram below to solder the speaker and 3.7V lithium battery, and then check that the battery is not connected reversely. You can turn on the power test. Turn on the switch and the blue indicator light should light up.
- If it does not light up, you should quickly turn off the power to check whether the battery is installed correctly. When the indicator light is on and there is a ding-dong prompt sound, you can turn on the mobile phone Bluetooth to refresh the Bluetooth name, find "DAU Audio" to connect and play the music on the mobile phone.
- Regarding TWS pairing, if you buy two DAU Audio Bluetooth modules, they can be paired in stereo. You need to turn off the Bluetooth of your mobile phone first, then turn on both boards at the same time, wait for a few seconds to hear the prompt tone, then the blue indicator light of one module is always on, and the indicator light of the other module is still flashing, indicating that the TWS pairing is successful.
- Then turn on the mobile phone to connect Bluetooth, and you will have a stereo wireless speaker. It is recommended to use a 500mAh-2000mAh capacity 3.7V lithium battery, and a 5V 1A-2A charger, and use a USB2.0 to Type-C cable for charging.
- MP3 Player TWS
DC3.5V-5V 5W Mono Audio Amplifier Decoder Board Supports TWS Pair TYPE-C Interface Electronic Component Kit Kuvaus
After getting the board, refer to the wiring diagram below to solder the speaker and 3.7V lithium battery, and then check that the battery is not connected reversely. You can turn the power test. Turn the and the indicator light should light .
If it does not light , you should quickly turn off the power to check whether the battery is installed correctly. When the indicator light is and there is a ding-dong prompt sound, you can turn the mobile phone to refresh the name, find "DAU Audio" to connect and the music the mobile phone.
Regarding TWS pairing, if you buy two DAU Audio modules, they can be paired in stereo. You need to turn off the of your mobile phone first, then turn both boards at the same , wait for a few seconds to hear the prompt tone, then the indicator light of one module is always , and the indicator light of the other module is still flashing, indicating that the TWS pairing is successful.
Then turn the mobile phone to connect , and you will have a stereo wireless speaker. It is recommended to use a 500mAh-2000mAh capacity 3.7V lithium battery, and a 5V 1A-2A charger, and use a USB2.0 to Type-C cable for charging.
Working voltage: DC3.5V-5V
Speaker: 2-4Ω (3W-10W), can connect one 2Ω speaker or two 4Ω speakers at the same
Charger: 5V/1A is recommended
Charging interface: Type-c
Headphone jack: 3.5mm
Battery: 3.7V polymer lithium battery or 18650 lithium battery (customers need to prepare their own batteries)
Size: 28.5mm x 17.3mm
It's DIY kits, needs to finish by yourself.
(Different batches may have different printed words, which will not affect the use)
Color:
Material: ABS
Package Contents:
5 * Mono amplifier decoding board (There are d
Tiedot
| OPC | PXKQBW7 |
|---|---|
| Koodit | 6031443110876 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 1cm |
|---|---|
| Width | 4cm |
| Length | 5cm |
| Weight | 0.0165kg |
| Colour | Purple |
| Material | ABS |
Would you like us to let you know when it's back?
DC3.5V-5V 5W Mono Audio Amplifier Decoder Board Supports TWS Pair TYPE-C Interface Electronic Component Kit
New
Saattaisit pitää myös näistä