Esp32-C6 1.47-Inch Lcd Screen Development Board Wifi 6 5 Onboard Rgb Color Led Type-C Interface

Esp32-C6 1.47-Inch Lcd Screen Development Board Wifi 6 5 Onboard Rgb Color Led Type-C Interface Kuvaus

Features: 1. This ESP32-C6-1.47-inch LCD screen development board integrates an LCD display screen, Micro- card slot, and commonly used peripheral connectors. 2. Equipped with high-performance RISC-V 32-bit processor and low-power RISC-V 32-bit processor, high-performance
3. The processor clock can reach to 160MHz, and the low-power processor clock can reach 20MHz. 4. Supports 2.4 GHz Wi Fi 6 (802.11ax/b/g/n) and 5 (LE), onboard antenna
5. Onboard 320KB ROM, 512KB , 16KB LP , and 4MB flash. 6. Onboard 1.47-inch LCD screen, 172x320 resolution, 262K color. 7. Export most GPIO and integrate full speed USB serial port. 8. Onboard Micro- card holder, capable of external card storage for images or files
9. Supports accurate control of flexible clocks, multiple power modes, etc., achieving low power consumption modes in multiple scenarios
Product Introduction: This product is a microcontroller development board that supports 2.4GHz Wi Fi 6 and BLE 5. Stacked 4MB Flash, onboard 1.47-inch LCD screen, integrated LCD display screen, Micro- card slot and commonly used peripherals, can smoothly run GUI interface programs such as LVGL; By combining multiple peripheral interfaces, it is possible to quickly develop HMI and other applications for ESP32-C6.

Parameter：
Interface: USB Type-C
Main control chip: ESP32-C6
Screen type: TFT
LCD screen: 1.47 inches
Resolution: 172x320
Screen control chip: Display: ST7789
Onboard device: Micro-
Material: Plastic + PC
Color: As shown
common problem:
Question 1: If the module keeps resetting, will the recognition status flicker when viewed from the device manager?
Answer: This situation may be caused by the USB port being unstable due to a blank Flash. You can long press the BOOT button, press RESET at the same t