ETH01-EVO Onboard ESP32-C3 Development Board with Ethernet WIFI 3-In-1 IoT Gateway Convenient Module

ETH01-EVO Onboard ESP32-C3 Development Board with Ethernet WIFI 3-In-1 IoT Gateway Convenient Module Kuvaus

Features: 1. ETH01-EVO Is A Three-In-One Iot Communication Gateway Based The ESP32-C3 Chip That Supports Wifi, And Ethernet. It Supports A Complete TCP/IP Protocol Stack And At Commands, Making It Easy For Users To Complete Embedded Devices. The Networking Function Greatly Reduces Development And Cost.
2. The Module Is Compatible With Half-Pad And Connector Through-Hole Designs. The Module Can Be Soldered Directly To The Board Or Used A Breadboard. The Poe Position Is Reserved To Support Different Scenarios.
3. The ESP32-C3 Series IC Is A SOC Integrating 2.4GHZ Wi-Fi And Dual-Mode, With Ultra-High Radio Frequency Performance, Stability, Reliability And Ultra-Low Power Consumption.
4. Mcu: ESP32-C3; Provides At Command Set; At Command Routines
5. Eth01-Evo Onboard Esp32-C3 Development Board; Reserved Poe Position; Three-In-One Iot Communication Gateway For Wifi, And Ethernet

Description:
1. Type: Development Board
2. Function: Three-In-One Iot Communication Gateway For Wifi, And Ethernet
Note:
Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use
Material: PCB
colour: As shown

Package Contents:
1 x Development Board Module
2 x Pin Header