H36 Combo Advanced 3D Printer Tool Board with 125C Heat Resistance USB Hubs, Enhanced Performance
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 128,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (4,12 €) | pe 10. - ke 15. heinä
Myyjä: Papishop
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- H36 Combo V1 is a newly designed high temperature tool board running Klipper firmware. Based on STMG0B1T3, the maximum operating temperature can reach 125 degrees Celsius (CAN only). It also provides two communication methods: CANBUS and USB. The onboard USBHUB has up to two USB interfaces (or one CAN and one USB), which can be used to connect to the IDM Scanner Leveling Sensor camera, etc.
- Experience cutting-edge 3D printing with the H36 Advanced Tool Board, specifically designed to support Klipper firmware. This model includes onboard USB hubs that significantly enhance connectivity and performance, making it ideal for complex printing tasks. The robust construction and reliable firmware integration ensure a seamless printing experience, enhancing both efficiency and output quality.
- CAN Tool Board
- 3D Printer Tool Board
- 125°C Heat Resistance
H36 Combo Advanced 3D Printer Tool Board with 125C Heat Resistance USB Hubs, Enhanced Performance Kuvaus
H36 Combo V1 is a newly designed high temperature tool board running Klipper firmware. Based STMG0B1T3, the maximum operating temperature can reach 125 degrees Celsius (CAN only). It also provides two communication methods: CANBUS and USB. The onboard USBHUB has to two USB interfaces (or one CAN and one USB), which can be used to connect to the IDM Scanner Leveling Sensor camera, etc.
Experience cutting- 3D printing with the H36 Advanced Tool Board, specifically designed to support Klipper firmware. This model includes onboard USB hubs that significantly enhance connectivity and performance, making it ideal for complex printing tasks. The robust construction and reliable firmware integration ensure a seamless printing experience, enhancing both efficiency and output quality.
STM32G0B1T3 MCU, to 125 degrees Celsius, supports Klipper Firmware
6-layer PCB design, all solid capacitors and tantalum capacitors, better heat dissipation
Onboard IO controlled CAN/USB
Onboard RESET and BOOT0 buttons for easy firmware update
Fan control/heating both use independent high-power MOS, safer and lower heat generation
Onboard 5V@3A -, 5V load can reach 15W
XT30 interface, custom cable comes with the board
Support CAN / USB2.0 connection
Onboard TMC2209
3x 3pin Fans, 3x IO with level converter, 1x RGB,1x Heat, 1x thermistor,1x status LED
ADXL345 Accelerometer onboard
USB-C onboard for Firmware update
Due to different batches, there may be differences in product appearance and printed text, which will not affect use.
Colour:Black
Material:PCB
Package Contents:
1 * H36 Advanced 3D Printer Tool Board
Tiedot
| OPC | PV882J2 |
|---|---|
| Brändi | Typecat |
| Koodit | 4713941958618 (EAN) |
Tuotetiedot
| Height | 6cm |
|---|---|
| Width | 10cm |
| Length | 15cm |
| Weight | 0.2375kg |
| Colour | Black |
| Material | PCB |
Vertaile myyjiä tuotteelle H36 Combo Advanced 3D Printer Tool Board with 125C Heat Resistance USB Hubs, Enhanced Performance
- Uusi alkaen 56,71 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(420 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
52,59 €
|
+4,12 € Delivery
Arvioitu toimitus:
10-15 heinä
|
56,71 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset