J04 Timer Delay Relay 5V 12V 24V Off Timer Module Trigger Cycle Dual MOS Delay Control Board with Digital Tube

J04 Timer Delay Relay 5V 12V 24V Off Timer Module Trigger Cycle Dual MOS Delay Control Board with Digital Tube Kuvaus

Wide working voltage:The trigger cycle timer delay controller module work voltage is 5V-36V. Meet the use of most equipment. Control Current is 30A(Max and need a heat sink! Normal temperature 15A 400W). Trigger signal source: High-level trigger (3.0V-24V)
Different parameters can be set: OP,CL,LOP these parameters can be set. OP- , CL-off , LOP-number of cycles (1-999 times, "---" means infinite cycles). These parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off
One key emergency stop function:The module with One key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn. And it supports sleep mode. After enabling, the display will automatically turn off if without any operation within 5 minutes. Press any button to wake
Unlimited switching times:This delay circuit can realize the circuit high frequency fast and frequent and off, unlimited switching times. No noise will be generated during the -off process, no electric sparks, and no electromagnetic interference. The service life is longer than that of common electromagnetic relays
Dual MOS output: This MOS tube pulse generator uses dual MOS parallel active output, lower internal resistance, higher current, and strong power. 15A, 400W at normal temperature.

Colour:Transparent
Material:ABS

Package Contents:
1 x MOS tube pulse generator