Sorry, this item is temporarily out of stock.

KINGROON 3D Printer Double Roll Filament Dry Box 360 Hot Air Circulation Heating Adjustable Screen Display Drying Box US PLUG

New

71,46 €

Would you like us to let you know when it's back?

Lisää koriin

Kuvaus ja tiedot

Yhteenveto

Why do consumables need to be dried: If the consumables are damp, contaminated, or improperly stored, they will not only affect the printing effect, but also cause a series of problems such as bubbles, drawing, clogging, rough surface, and reduced interlayer bonding strength, and will also cause waste of consumables and losses.
Super large space: Larger volume, support simultaneous drying of 2 rolls of 1kg consumables, meeting the needs of users to print and dry two printers at the same time.
360-degree hot air circulation heating: The heating plate heats up quickly, and the built-in circulation fan performs 360-degree hot air circulation in the cavity, which is evenly heated, effectively dries the consumables, and improves the printing effect.
Wide compatibility: It is compatible with 99% of 3D printing consumables on the market, can be heated to 70 degrees, and can dry engineering consumables such as PA, PC, and ABS.
Display screen: Real-time observation of humidity and temperature, countdown display of drying time, so that you can grasp the drying situation at any time, and the heating time can be 0-24 hours, which can be freely set to allow the consumables to be fully dried.

KINGROON 3D Printer Double Roll Filament Dry Box 360 Hot Air Circulation Heating Adjustable Screen Display Drying Box US PLUG Kuvaus

do consumables need to be dried: If the consumables are damp, contaminated, or improperly stored, they will not only affect the printing effect, but also cause a series of problems such as bubbles, drawing, clogging, rough surface, and reduced interlayer bonding strength, and will also cause waste of consumables and losses.
Super large space: Larger volume, support simultaneous drying of 2 rolls of 1kg consumables, meeting the needs of users to print and dry two printers at the same .
360-degree hot air circulation heating: The heating plate heats quickly, and the built-in circulation fan performs 360-degree hot air circulation in the cavity, which is evenly heated, effectively dries the consumables, and improves the printing effect.
Wide compatibility: It is compatible with 99% of 3D printing consumables the market, can be heated to 70 degrees, and can dry engineering consumables such as PA, PC, and ABS.
Display screen: Real- observation of humidity and temperature, countdown display of drying , so that you can grasp the drying situation at any , and the heating can be 0-24 hours, which can be freely set to allow the consumables to be fully dried.

Moisture-proof and dust-proof, safety protection: sealed structure, desiccant can also be built-in (desiccant is not included), and there is no need to worry about the consumables getting damp even if the machine is not turned .
Parameters:
Maximum capacity:2*Ф200*73(H)
Rated power:AC100-240V 50/60Hz
Output power:DC24V-3A
Heater power:60W
Supported consumables:2x1KG/2x500g/1x250g/1x200g
Plug Type:US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the United States, the Philippines and so .
Voltage:AC100-240V
Color:White
Material:plastic

Package Contents:
1 * drying box
1 * pow