Kitchen Cabinet Pulls Installation Jig Drill Mounting Template for Cabinet Knobs Cabinet Handles Drill for Drawer Pulls
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 129,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (4,12 €) | pe 31. heinä - ke 5. elo
Myyjä: JJBRDZ
Palautukset: 30 päivää
180 päivän maksuturva
Suosituimmat tuotteet kategoriassa Teolliset hallitsijat
Yhteenveto
- Application Hole Center:Cabinet hardware with 2.5inch (64mm) 3inch (76mm) 3.5inch (90mm) 3.75inch (96mm) 4inch (102mm) 4.5inch (115mm) 5inch (128mm) 6.25inch (160mm) hole centers;The wide size scope of application can satisfied what you different needs.
- Easy Installation:The mounting template will help install cabinet pulls fast and easily.Clear measurement lines ensure drilling accurate installation holes.Find one of the pre-defined hole centers which worked best for your pulls,use a pencil to circle it,and it was easy to mark a drilling spot on all of the cabinets with a pencil.
- Drill Fearlessly:Once you've marked the hole center, fit the 3/16inch drill bit into your drill, but make sure the screws are 8/32inch firstly. And be sure to drill from front to back.If you do have splintering, it will be on the inside where nobody can see it.
- Cabinet Handles Drill
- for Drawer Pulls
Kitchen Cabinet Pulls Installation Jig Drill Mounting Template for Cabinet Knobs Cabinet Handles Drill for Drawer Pulls Kuvaus
Application Hole Center:Cabinet hardware with 2.5inch (64mm) 3inch (76mm) 3.5inch (90mm) 3.75inch (96mm) 4inch (102mm) 4.5inch (115mm) 5inch (128mm) 6.25inch (160mm) hole centers;The wide size scope of application can satisfied what you different needs.
Easy Installation:The mounting template will help install cabinet pulls fast and easily.Clear measurement lines ensure drilling accurate installation holes.Find one of the pre-defined hole centers which worked best for your pulls,use a pencil to circle it,and it was easy to mark a drilling spot all of the cabinets with a pencil.
Drill Fearlessly:Once you've marked the hole center, fit the 3/16inch drill bit into your drill, but make sure the screws are 8/32inch firstly. And be sure to drill from front to back.If you do have splintering, it will be the inside where nobody can see it.
Colour:As Shown
Material:ABS
Package Contents:
1 * cabinet door drilling Template
1 * Drawer Drilling Template
1 * Drill Bit.
1 * punch
Tiedot
| OPC | PVP7QXQ |
|---|---|
| Brändi | Torribaly |
| Koodit | 4712131340714 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 5cm |
|---|---|
| Width | 14cm |
| Length | 20cm |
| Weight | 0.181kg |
| Colour | As Shown |
| Material | ABS |
Vertaile myyjiä tuotteelle Kitchen Cabinet Pulls Installation Jig Drill Mounting Template for Cabinet Knobs Cabinet Handles Drill for Drawer Pulls
- Uusi alkaen 21,82 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(447 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
17,70 €
|
+4,12 € Delivery
Arvioitu toimitus:
31 heinä - 5 elo
|
21,82 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset