Magnetic Levitation DIY Kits Suspension Magnetic Electronic Kit 150G

Magnetic Levitation DIY Kits Suspension Magnetic Electronic Kit 150G Kuvaus

Usage method:

Placing suspended solids and precautions
1. After the equipment is powered , the power indicator the PCB board will be lit. At this , hold the float from the bottom of the to the bottom of the coil slowly. At about 5cm, you will feel the force that the coil will absorb the float at this . At this , hold the float with one hand to feel the upward force, and use the other hand to adjust the sliding rheostat the PCB board. When you feel that the two forces can almost balance, stop adjusting the sliding rheostat, Then slowly loosen the float to keep it stable. In this way, the float can be successfully floated. The sliding rheostat reduces the magnetic force clockwise and increases the magnetic force counterclockwise. The magnetic force cannot be too large or too small. The rotating position of the sliding rheostat can refer to the above picture.
2. The float must be powered off for cooling if it fails to be placed for many times ( to 5 times), otherwise it is easy to damage the element
3. Do not float the float the kit for a long ( to 5 minutes), which may cause equipment damage.
Color: As Shown
Material: Plastic+Metal

Package Contents:
1set of Magnetic Levitation DIY Kits