PIXRACER R15 Autopilot Pixhawk Flight Controller RC Quadcopter Simple Set

PIXRACER R15 Autopilot Pixhawk Flight Controller RC Quadcopter Simple Set Kuvaus

The Pixracer is the common name for the FMUv4 generation of Pixhawk autopilots. It has been designed primarily for the demanding requirements of small multicopters, but of course can be used planes and other vehicles which require no more than 6 pwm outputs for controlling escs and motors.
Includes an ESP8266 for easy WiFi Updates. Comes with the latest Ardupilot ESP8266 firmware developed by Andrew Tridge. This new firmware has a nice web interface, MavLink2 support and an easier way to do future updates via the web interface.
Interfaces/Connectivity
Wifi: ESP-01 802.11bgn Flashed with MavESP8266
MicroSD card reader

Micro-USB
RGB LED
GPS (serial + I2C)
TELEM1/TELEM2
Wifi serial
FrSky Telemetry serial
Debug connector (serial + SWD)
Connectors: GPS+I2C, RC-IN, PPM-IN, RSSI, SBus-IN, -IN, USART3 (TxD, RxD, CTS, RTS), USART2 (TxD, RxD, CTS, RTS), FRSky-IN, FRSky-OUT, CAN, USART8 (TxD, RxD), ESP8266 (full set), SERVO1-SERVO6, USART7 (TxD, RxD), JTAG (SWDIO, SWCLK), POWER-BRICK (VDD, Voltage, Current, GND), BUZZER-LED_BUTTON.
Power System:
5-5.5VDC from USB or PowerBrick connector. Optional/recommended ACSP4 +5V/+12V Power Supply.
Weight and Dimensions:
Weight: 10.54g (0.37 oz)
Width: 36mm (1.42inch)
Length: 36mm (1.42inch)
Color: As Shown
Material: plastic

Package Contents:
1 * Pixracer R15 Flight controller
1 * Plastic shell
1 * Safety switcher and Buzzer
1 * Micro4G TFCard
1 * Card reader
1 * Cables set (GH1.25 6P +GH1.25 4P + GH1.25 5P )
1 * ESP8266 Wifi module