Upgrade BL- Touch V3.2 Auto Bed Leveling Sensor with 4 Brackets BL - Touch Kit for 8 or 32 Bit Motherboard
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 134,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Prioriteetti (Ilmainen) | to 1. - ti 6. loka
Myyjä: CNNOTEPAD
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- [BL-Tocuh with 4 Mounting Brakets] 3D touch with 4 mounting brakets, it can compatible with for ender 3 series, for ender 5, for ender 5 Pro, for ender 5s, for CR10, for CR10 V3 Printer. The bed leveling sensor kit includes adapter pinboard so it can be used for 8 or 32 Bit motherboard.
- [Wide Application] 3D touch is equipped with new structural design for higher precision, it's Standard Deviation in repeatability is around 0.003mm,can be widely used in various FDM 3D printers and give you an enjoyable experience. BL-Touch V3.2 auto bed leveling senor is controlled by hall effect, providing high-precision. Thus the bed material can be selected freely, glasses/ wood/ metal, etc.
- [2 Types Extension Cables] The auto bed leveling kit includes 2 different length cables (18cm/100cm) easy to disassembleset when the distance between your printer interface and the 3D Touch installation position is different, meet the wiring length needs of different printers.
- [Smart] The push pin of the 3D Touch sensor is operated two times to test when the power is on. The LED light blinks if a problem found on a self-test or on an operation.
- for ender 3 v3
Upgrade BL- Touch V3.2 Auto Bed Leveling Sensor with 4 Brackets BL - Touch Kit for 8 or 32 Bit Motherboard Kuvaus
[BL-Tocuh with 4 Mounting Brakets] 3D touch with 4 mounting brakets, it can compatible with for 3 series, for 5, for 5 Pro, for 5s, for CR10, for CR10 V3 Printer. The bed leveling sensor kit includes adapter pinboard so it can be used for 8 or 32 Bit motherboard.
[Wide Application] 3D touch is equipped with new structural design for higher precision, it's Standard Deviation in repeatability is around 0.003mm,can be widely used in various FDM 3D printers and give you an enjoyable experience. BL-Touch V3.2 auto bed leveling senor is controlled by hall effect, providing high-precision. Thus the bed material can be selected freely, glasses/ wood/ metal, etc.
[2 Types Extension Cables] The auto bed leveling kit includes 2 different length cables (18cm/100cm) easy to disassembleset when the distance between your printer interface and the 3D Touch installation position is different, meet the wiring length needs of different printers.
[] The push pin of the 3D Touch sensor is operated two times to test when the power is . The LED light blinks if a problem found a self-test or an operation.
Colour:As Shown
Material:Plastic
Package Contents:
1 * Leveling Sensor kit
Tiedot
| OPC | PTQRYYC |
|---|---|
| Brändi | Tlily |
| Koodit | 6033075580836 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 4cm |
|---|---|
| Width | 10cm |
| Length | 18cm |
| Weight | 0.112kg |
| Colour | As Shown |
| Material | Plastic |
Vertaile myyjiä tuotteelle Upgrade BL- Touch V3.2 Auto Bed Leveling Sensor with 4 Brackets BL - Touch Kit for 8 or 32 Bit Motherboard
- Uusi alkaen 26,21 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(466 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
26,21 €
|
+Free Priority Delivery
Arvioitu toimitus:
1-6 loka
|
26,21 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset