Adhésif de batterie compatible avec la bande de colle de remplacement de batterie iPhone 18 Pro Max

Description de Adhésif de batterie compatible avec la bande de colle de remplacement de batterie iPhone 18 Pro Max

A pre-cut battery adhesive strip for the iPhone 18 Pro Max, used to bond a new battery in place when you fit a replacement cell. It is cut to the footprint of the 18 Pro Max battery, so it lines up with the cell without any trimming. Once the original battery has been lifted out, the factory adhesive is spent and cannot be reused. Fitting a new cell without fresh adhesive leaves it loose inside the phone, where it can shift, rattle or press against nearby flex cables. A new strip holds the replacement battery flat and secure, just as the original did. On the iPhone 18 Pro Max the battery sits in a metal tray that is screwed to the frame, with the cell itself bonded to that tray. When a new cell goes into the tray it needs a fresh adhesive layer to hold it, and this strip provides that bond. The strip is supplied on peel-off liners. Clean away any old adhesive, apply the strip to the battery seat, remove the top liner, then press the new battery firmly into position. A useful spare for repair workshops and for anyone replacing an iPhone 18 Pro Max battery at home. Features: Pre-Cut Shape: Cut to the battery footprint of the iPhone 18 Pro Max. Secure Hold: Keeps the replacement battery flat and stops it moving inside the phone. Peel-Off Liners: Protects the adhesive until you are ready to fit it. Clean Fitting: No liquid glue, no mess and no curing time. Cost-Effective: Replace the battery yourself instead of replacing the whole phone. Compatibility: iPhone 18 Pro Max only. Not compatible with other iPhone models. Package Contents: 1 x Battery Adhesive For iPhone 18 Pro Max