Cadenas à code à 4 chiffres pour moto, 10 mm x 80 cm, noir

Résumé

• WORKING PRINCIPLE: Distinguished from ordinary traditional mechanical locks, it does not have a keyhole, through the password disk for unlocking and locking. The four digit password consists of 1,2,3,4 four digit combination, can be combined into 256 combinations, and the original password is 1234.
• BATTERY INSTALLATION METHOD: Twist open the battery cover screws, load three AAA batteries, and make sure that the polarity of the battery is correct, then you will hear the 'tick tick' sound, and then cover the water resistant silicone, cover the battery cover, lock the two battery door screws (Note: Screws must be tightened, otherwise it will cause the automatic alarm after locking).
• LOCK: Insert the lock into the bottom, press the center button, hear 'tick tick tick' three times, at this time push the side lock lever, the button can not pull out the lock means it is locked. The LED light will flash once in 3 seconds when it is locked. (Note: 5 seconds after locking into the alarm detection state. If the alarm is triggered, please enter the password and the center button to
• ALARM: (Alarm can stop automatically in 30 seconds, or enter correct code to stop alarm immediately) Alarm will be activated if you input wrong code three times when locking. Removing the back cover screws when locking will alarm, and the alarm will not stop until the battery is removed or the correct password is entered to stop the alarm immediately. Cutting the wire rope when locking will alar
• UNLOCK: In lock mode, enter the code (original code 1234) and the center button, a long 'tick' tone will be heard and the LED light will turn off, indicating that the lock has been unlocked. At this time, press and hold the lock lever button, then you can pull out the lock.