V1.3 UPA USB Programmer Diagnostic Tool UPA-USB ECU Chip Tuning Programmer for 2014 Version Main Unit Lite Programmer
En stock
Pourquoi vous allez adorer OnBuy :
- Gagnez du Cashback sur chaque achat – dépensez-le immédiatement sur votre prochaine commande
- Livraison gratuite – sur des millions d'articles sur le site
- Les clients nous adorent – 126,000 avis avec une note « Excellente »
Les prix des articles vendus sur OnBuy incluent la TVA.
Options de paiement sans intérêts disponibles
Voir la description complète et les détails du produit
Livraison : Standard (Gratuite) | ven. 19 - jeu. 25 juin
Vendu par : Nixon
Retours : 30 jours
Protection des paiements pendant 180 jours
Les produits les plus populaires dans la catégorie Puces et dispositifs de réglage pour voitures
Description de V1.3 UPA USB Programmer Diagnostic Tool UPA-USB ECU Chip Tuning Programmer for 2014 Version Main Unit Lite Programmer
V1.3 UPA USB Programmer Diagnostic Tool UPA-USB ECU Chip Tuning Programmer for 2014 Version Main Unit Lite Programmer
EEproms - Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.
MCU's - Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply).
Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier)
Once your workshop is equipped with our Adapter Set you have a all new UPA Experience.
Top 2 Reasons to Get the UPA:
1. This set of New UPA USB Programmer main unit used for main unit damaged
2. Software version: V1.3
Note:This set of New UPA USB Programmer main unit, do not contain Adapters.
STMicroelectronics ST62*:
ST6240, ST6245, ST6249
NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9
for HC05*: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28, MC68HC05P3, MC68HC705P3*, MC68HC05X16, MC68HC05X32
for HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A
Colour:As Shown
Material:ABS
Package Contents:
1 * programmer
1 * wiring harness
1 * motherboard
1 * CD
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Informations
| OPC | PTHDPN5 |
|---|---|
| Marque | unbrand |
| Codes | 9152359445481 (EAN) |
Comparez les vendeurs de V1.3 UPA USB Programmer Diagnostic Tool UPA-USB ECU Chip Tuning Programmer for 2014 Version Main Unit Lite Programmer
- Neuf à partir de 34,95 €
| Vendeur | Notes | Garantie | Retours | Prix | Livraison | Total | Quantité |
|---|---|---|---|---|---|---|---|
|
Envoyé depuis :
|
(50 avis) | 1 mois |
30 jours
Retours gratuits Non
|
34,95 €
|
+Free Delivery
Date de livraison estimée :
19-25 juin
|
34,95 €
|
Gagnez en faisant vos achats avec du Cashback instantané sur tout.
Sans frais, sans engagement
- Versé sur votre compte OnBuy
- Utilisez-le pour votre prochain achat
- Économisez-le ou retirez-le
Rejoignez le programme cashback VIP
Un seul achat pour débloquer de meilleures offres et réductions



