Sorry, this item is temporarily out of stock.

200W Brushless Motor Driver Control Board 6-24V Motor Controller Protection Module for Hard Drive Motor

New

Παρόμοια προϊόντα που πιστεύουμε ότι θα σου αρέσουν

Μετατροπείς ισχύος

4000W Converter 12V 220V Pure Sine Wave Inverter Pure Sine Wave Transformer with Remote Control &44,64 €ΔΩΡΕΑΝ Παράδοση

Battery Equalizer DC 12V 24V Batteries Voltage Inverter Balancer Lead Acid Battery Charger Regulator40,00 €ΔΩΡΕΑΝ Παράδοση

Μετατροπέας 200W DC 12V σε AC 12V, Μονάδα γεννήτριας τετραγωνικών κυμάτων 50Hz10,96 €ΔΩΡΕΑΝ Παράδοση

3Pcs LM393 3,5-24V Μονάδα σύγκρισης τάσης με ένδειξη LED5,72 €ΔΩΡΕΑΝ Παράδοση

4000W Converter 12V 220V Pure Sine Wave Inverter Pure Sine Wave Transformer with Remote Control &44,64 €ΔΩΡΕΑΝ Παράδοση

Battery Equalizer DC 12V 24V Batteries Voltage Inverter Balancer Lead Acid Battery Charger Regulator40,00 €ΔΩΡΕΑΝ Παράδοση

Μετατροπέας 200W DC 12V σε AC 12V, Μονάδα γεννήτριας τετραγωνικών κυμάτων 50Hz10,96 €ΔΩΡΕΑΝ Παράδοση

3Pcs LM393 3,5-24V Μονάδα σύγκρισης τάσης με ένδειξη LED5,72 €ΔΩΡΕΑΝ Παράδοση

Would you like us to let you know when it's back?

Προσθήκη στο καλάθι

Περιγραφή & Λεπτομέρειες

Περίληψη

This driver board comes with reverse connection protection, and reversing the power supply will not burn the board. Equipped with locked rotor protection.
Adjust the potentiometer to any speed point and turn it on without self checking.
When the motor is running, if the forward and reverse directions are changed, the motor will immediately reverse after stopping.
After the brake is turned off, the motor will immediately stop and prevent its inertia.
The wiring is simple, just connect the three wires of the brushless motor and the positive and negative poles of the power supply to switch.

200W Brushless Motor Driver Control Board 6-24V Motor Controller Protection Module for Hard Drive Motor Περιγραφή

This driver board comes with reverse connection protection, and reversing the power supply will not burn the board. Equipped with locked rotor protection.
Adjust the potentiometer to any speed point and turn it without self checking.
When the motor is running, if the forward and reverse directions are changed, the motor will immediately reverse after stopping.
After the brake is turned off, the motor will immediately stop and prevent its inertia.
The wiring is simple, just connect the three wires of the brushless motor and the positive and negative poles of the power supply to .

Color: As Shown
Material: Plastic+Metal

Package Contents:
1*Motor Driver Control Board

Λεπτομέρειες