2Pair Front Left&Right Car Headlight Lens Light Cover for A4 B8 2008-2012

2Pair Front Left&Right Car Headlight Lens Light Cover for A4 B8 2008-2012 Περιγραφή

installation method: 1. If you have a furnace that better, Simply remove the back cover of the luminaire and the bulb. Put in the oven and warm 80 paragraph C. Heat paragraph softens 10 minutes and a glue. The lamp is separate from the carcass lamp.
2: If you do not have an oven, you have to use a heat gun, which heats the sharpest corner of the headlight, warms to it for a while, and After the glue has softened Inserts a screwdriver. (Note: do not use too many forums to avoid damage; when warming a glove And touch, even a little heat, to stop the heating. Make sure that the temperature is not too high to avoid damage to the Faris)
4: after the long heat, quickly open the corner and do not forget to wear gloves (gloves should be clean and can not be discarded). 5: ran well and was more efficient, heating a paragraph, a minute was enough. If it does not go well. Continue one. Heat a separate part with a heat gun. A glue softens. Quickly separated. 6: after separation, do your best. Clean the glue inside the glue tank. Put gloves and start installing a new lamp. 7: Use glue to apply a glue to the container.
8: Install a new lamp cover. A small amount of glue overflows during an installation. It can not be processed in the first place. After the glue
Dried. Deal with a blade.

For A4 B8 2008-2012 Car Headlight Clear Lens Shell Cover Driver & Passenger Side Auto Shell
Headlight lens cover made of high quality Polycarbonate (PC) plastic material, environment-friendly with a protective UV coating which prevents yellowing or fading. Having Elegant appearance, looks very cool and Top quality guaranteed.
Introduction:
Product Name: Car Headlight lamp
Production process: high temperature injection molding PC hardening
Product Material: PC material
Applicable models: for A4 b8 2008-2012
1.For AUD