Εικόνες προϊόντος
2pcs ZVS Tapless Finished Product Version Induction Heating Jacobian Ladder Driver,Driver Module
Νέο
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 133,000 κριτικές με βαθμολογία « Άριστα »
22,58 €
26,56 €
Έκπτωση 15%!
+10,14 € Παράδοση
1%
Τι είναι το άμεσο Cashback;
Μάθετε περισσότερα
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Κανονικό (10,14 €) | Παρ 18 - Πεμ 24 Σεπ
Πωλείται από: BUBLBUshop
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
Μπορεί επίσης να σου αρέσουν
Περιγραφή & Λεπτομέρειες
Περίληψη
- This tapless mini board ZVS finished board, high voltage package, cooling fan, etc. This kit requires certain hands-on skills and related knowledge. If you can't even use a soldering iron and the power supply's positive and negative poles can't be separated, it is recommended not to shoot.
- The maximum power is 120W (when 12V induction heating). When the high voltage package is 12V and the primary 5+5 turns, it is about 30W. The input voltage is DC 5V~12V, this voltage range is the voltage when working, not the voltage when the power supply is no-load!
- Confirm that all components are welded correctly, and that the positive and negative poles of the power cord are not reversed. After connecting the load (heating coil, high-voltage package), re-energize! No power on without load! No-load power on is easy to damage!
- Heating coil: The width of the heated object should be as far as possible between 1/3~1/2 of the inner diameter of the heating coil, and the maximum should not exceed 2/3! The diameter of the heating object should be controlled within 20mm as far as possible.
- In induction heating, the power is cut off for 5 minutes to cool. Because the current is relatively large during induction heating, the heating of the coil is relatively large. When heating, part of the heat generated by the heated object will be transferred to the heating coil, and the temperature of the heating coil will be very high over time.
2pcs ZVS Tapless Finished Product Version Induction Heating Jacobian Ladder Driver,Driver Module Περιγραφή
This tapless board ZVS finished board, high voltage package, cooling fan, etc. This kit requires certain hands- skills and related knowledge. If you can't even use a soldering iron and the power supply's positive and negative poles can't be separated, it is recommended not to shoot.
The maximum power is 120W (when 12V induction heating). When the high voltage package is 12V and the primary 5+5 turns, it is about 30W. The input voltage is 5V~12V, this voltage range is the voltage when working, not the voltage when the power supply is no-load!
Confirm that all components are welded correctly, and that the positive and negative poles of the power cord are not reversed. After connecting the load (heating coil, high-voltage package), re-energize! No power without load! No-load power is easy to damage!
Heating coil: The width of the heated object should be as far as possible between 1/3~1/2 of the inner diameter of the heating coil, and the maximum should not exceed 2/3! The diameter of the heating object should be controlled within 20mm as far as possible.
In induction heating, the power is cut off for 5 minutes to cool. Because the current is relatively large during induction heating, the heating of the coil is relatively large. When heating, part of the heat generated by the heated object will be transferred to the heating coil, and the temperature of the heating coil will be very high over .
Color: As Shown
Material: PCB+Metal
Package Contents:
2*driver module
Λεπτομέρειες
| OPC | PWF6RBX |
|---|---|
| Κωδικοί | 6031453583219 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Στοιχεία Προϊόντος
| Height | 9cm |
|---|---|
| Width | 7cm |
| Length | 8cm |
| Weight | 0.23kg |
| Colour | As Shown |
| Material | PCB+Metal |
Σύγκρινε Πωλητές για 2pcs ZVS Tapless Finished Product Version Induction Heating Jacobian Ladder Driver,Driver Module
- Νέο από 32,72 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(308 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
22,58 €
|
+10,14 € Delivery
Εκτ. Παράδοση:
18-24 Σεπ
|
32,72 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά