4538 for Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic Interface, Precision Load Cell Amplifier Board for Raspberry Pi
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 139,000 κριτικές με βαθμολογία « Άριστα »
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Προτεραιότητα (2,00 €) | Παρ 27 Νοε - Τετ 2 Δεκ
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
Μπορεί επίσης να σου αρέσουν
Περίληψη
- The NAU7802 contains a super-high-resolution 24-Bit differential ADC with extra gain and calibration circuitry that makes it perfect for measuring strain gauges / load cells or other sensors that have four wires that are connected in a Wheatstone bridge arrangement.
- Each breakout comes with a NAU7802 ADC chip, plus some support circuitry, and 4 terminal blocks that can be used to connect a 4-wire sensor.
- The E- pad connects to ground (often a black wire), the E+ pad connects to a generated voltage from the NAU7802 that can be configured from 2.4V to 4.0V for a solid positive reference (often a red wire).
- Then A- and A+ pads connect to the differential outputs from the bridge. For example, connecting to a strain gauge these tend to be the white and green wires.
- As the sensor is twisted and bent, the slight changes in resistance are converted to minuscule voltage changes that can be read by the NAU ADC for converting into force or mass measurements.
4538 for Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic Interface, Precision Load Cell Amplifier Board for Raspberry Pi Περιγραφή
The NAU7802 contains a super-high-resolution 24-Bit differential ADC with extra gain and calibration circuitry that makes it perfect for measuring strain gauges / load cells or other sensors that have four wires that are connected in a Wheatstone bridge arrangement.
Each breakout comes with a NAU7802 ADC chip, some support circuitry, and 4 terminal blocks that can be used to connect a 4-wire sensor.
The E- pad connects to ground (often a black wire), the E+ pad connects to a generated voltage from the NAU7802 that can be configured from 2.4V to 4.0V for a solid positive reference (often a red wire).
Then A- and A+ pads connect to the differential outputs from the bridge. For example, connecting to a strain gauge these tend to be the white and green wires.
As the sensor is twisted and bent, the slight changes in resistance are converted to minuscule voltage changes that can be read by the NAU ADC for converting into force or mass measurements.
You can use for CedarGrove's CircuitPython/Python library to configure and read the ADC for fast interfacing. Note that this sensor has a fixed I2C address,if multiple sensors are desired one I2C bus, a multiplexer can be used
Color: Black
Material: plastic
Package Contents:
1*4538 NAU7802 module
Λεπτομέρειες
| OPC | PVYJZVX |
|---|---|
| Μάρκα | kepptory |
| Κωδικοί | 6031968221798 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Στοιχεία Προϊόντος
| Height | 1cm |
|---|---|
| Width | 2cm |
| Length | 2cm |
| Weight | 0.0035kg |
| Colour | Black |
| Material | Plastic |
Σύγκρινε Πωλητές για 4538 for Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic Interface, Precision Load Cell Amplifier Board for Raspberry Pi
- Νέο από 31,84 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(208 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
29,84 €
|
+2,00 € Delivery
Εκτ. Παράδοση:
27 Νοε - 2 Δεκ
|
31,84 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά




