5-in-1 Digital PH Meter, Voice Water Quality Tester, PH/EC/TDS/Salinity/Temp Meter, TDS Meter for Drinking Water Pool

5-in-1 Digital PH Meter, Voice Water Quality Tester, PH/EC/TDS/Salinity/Temp Meter, TDS Meter for Drinking Water Pool Περιγραφή

5-in-1 pH Meter: This is a digital water quality tester kit with pH meter, TDS meter and EC/salinity/temperature test functions, which is fully functional and can meet your different needs. The VA backlit display can provide you with clear readings even at night.
High Precision: This water quality tester is highly accurate and reliable. pH resolution 0.01pH, accuracy 0.05pH. TDS range 0-9999ppm, resolution 1ppm, accuracy 2%. EC range 0-9999μS/cm, resolution 1μS/cm, accuracy 2%. Salinity range 0.01%-10%, resolution 0.01, accuracy 5%. Temperature range 0.1-60/32.1-140.
Wide range of uses: This EDS meter can be used in various occasions. It can be used in swimming pools, laboratories, aquariums, hydroponics, spas, kitchens, drinking water, allowing you to enjoy a better and healthier life.
Warm Tips: Before use, the probe should be soaked in water for two minutes to activate the probe before use or calibration. Put the protective cover immediately after use to avoid the test electrode from being exposed to the air for a long and drying out. If the electrode is dry, put the electrode in distilled water to keep it moist.

Easy to use:
1. Remove the protective cover;
2. Press the "/OFF" key to turn the meter;
3. Immerse the meter electrode in the test solution (the immersion depth cannot exceed the immersion );
4. Stir gently and wait for the reading to stabilize;
5. If you need to test the temperature, long press the "HOLD/TEMP" button to get the temperature reading;
6. When finished, clean the electrode with distilled water and press the "/OFF" key to turn off the meter;
7. Replace the protective cover after use.
Note:Due to different factory batches, slight differences in appearance colors will not affect the use.
Colour:As Shown
Material:Plastic

Package Content