AN4 Adapter Engine Steam Vent Hose Kit Braided Hose for LS LSX LS1 LS2 LS6 LM7

AN4 Adapter Engine Steam Vent Hose Kit Braided Hose for LS LSX LS1 LS2 LS6 LM7 Περιγραφή

For 4an Anodized Black Aluminum Steam Vents with Hardware & Hoses for Front & Rear Venting.
For Ls Family of Engines Ls1 Ls2 Ls6 Lm7. (Will Not Fit Fast Intakes)
Vehicle Compatibility Charts Are for Reference Only. Check Your to Match Your Needs.
Package Included: 3 - -4AN T-Fitting Female/Male Coupler 4 - -4AN Steam Vent Fitting 7 - -4AN hose end fittings 2' - Open end nylon hose to attach to your radiator's existing steam vent port. -4 nylon braided hose with bursting strength at 1,500 #. Cut to the correct length. Fittings installed to supply to your front and rear Steam Vents.
Note: Installation guide not included, we strongly recommend you seek professional installation. Please check as much as possible to make sure the item is what you need.

Avoid Air Pockets Create Pressure Which Increases Temperature.
Not Having 4 an Coolant Crossover Will Allow Steam Pockets to Build in the Highest Point of Your Cylinder and Create Hot Pockets.
Allowing the Radiator Cap to Release Pressure As Intended Thereby Removing the Steam/Pressure from the System.
Best Done When the Engine Is Not Hot As It Can Become a Safety Hazard to Handle Hot Fluids.
Does Not Have Clearance Under the Intake to Run a Proper Traditional Hard Steam Kit Coolant Crossover Setup.
TIPS:
Some vehicles may have 3/8" barb fitting their radiators. See below for a few solutions.
1) Apply -40 to the hose and push hard. try like heck to slip the -4 hose over the larger barb with some -40
2) Stretch the hose overnight and/or apply some heat
3) Buy a -4 to -6 hose adapter hose with fittings.
Color: As Shown
Material: plastic

Package Contents:
1*Engine Steam Vent Hose Kit