Sorry, this item is temporarily out of stock.

Car IMMO Emulator for E34 E36 E38 E39 E46 EWS IMMO EWS2 EWS3.2 Emulator Key Immobilizer Car Diagnostic Tool

Name: Car IMMO Emulator for E34 E36 E38 E39 E46 EWS IMMO EWS2 EWS3.2 Emulator Key Immobilizer Car Diagnostic Tool
Brand: Melitt
SKU: PTNZ68C
Price: 21.78 EUR
Availability: OutOfStock

Μάρκα Melitt

New

21,78 €

Παρόμοια προϊόντα που πιστεύουμε ότι θα σου αρέσουν

Διαγνωστικά εργαλεία συστήματος κινητήρα αυτοκινήτου

VAG-COM VCDS Premium Interface and Software Package28,00 €ΔΩΡΕΑΝ Παράδοση

4 in 1 Hand Held Car Refractometer Vehicle 30-35% Adblue Fluid Glycol Urea Tester Antifreeze with ATC18,88 €ΔΩΡΕΑΝ Παράδοση

Multidiag Pro TCS Bluetooth OBD2 Scanner V2021.11 Multidiag PRO Relay Car Truck Diagnostic Tool48,70 €ΔΩΡΕΑΝ Παράδοση

2025 Νέο διαγνωστικό εργαλείο Tcs-cdp/pro-plus συμβατό με V2020.3 M8 Autocom Cdp+pro Obd274,99 €ΔΩΡΕΑΝ Παράδοση

Κύριο καλώδιο δοκιμής καλωδίου OBD2 15 ακίδων για Maxisys MK808/MP808/MS90612,49 €ΔΩΡΕΑΝ Παράδοση

LAUNCH CR319 Creader Αναγνώστης κωδικών αυτοκινήτων OBD228,46 €ΔΩΡΕΑΝ Παράδοση

For BMW INPA K+CAN K+DCAN FTDI FT232RL Chip with Switch USB Interface Diagnostic Tool for BMW OBD2 Scanner38,00 €ΔΩΡΕΑΝ Παράδοση

VAG-COM VCDS Premium Interface and Software Package28,00 €ΔΩΡΕΑΝ Παράδοση

Would you like us to let you know when it's back?

Προσθήκη στο καλάθι

Περιγραφή & Λεπτομέρειες

Περίληψη

Easy installation with a simple connection to the vehicle's diagnostic connector.
Compatible with various K-line diagnostic adapters for versatile use.
Allows for direct reading of ISN number from the engine control unit for convenience.
Service mode enabled with JUMPER 1 for straightforward emulator configuration.
Supports multiple ECU types, ensuring broad compatibility and functionality.

Car IMMO Emulator for E34 E36 E38 E39 E46 EWS IMMO EWS2 EWS3.2 Emulator Key Immobilizer Car Diagnostic Tool Περιγραφή

Easy installation with a simple connection to the vehicle's diagnostic connector.
Compatible with various K- diagnostic adapters for versatile use.
Allows for direct reading of ISN number from the engine control unit for convenience.
Service mode enabled with JUMPER 1 for straightforward emulator configuration.
Supports multiple ECU types, ensuring broad compatibility and functionality.

Installation:
1. Remove original EWS2 control unit, find +12v ACC, GND, K- wires, attach emulator. Emulator must be in service mode: JUMPER 1 shorted.
2. Connect ANY K- diagnostic adapter to vehicle diagnostic connector and launch EMULATOR CONFIGURATION UTILITY:
3. Choose COM port, write in desired ISN number, press button Store. Or -
4. For some ECU s it is possible to read ISN number directly from engine control unit. In this case select option ECU xxxxx , press Read. Software will try to read ISN. If successful, choose option EWS emulator and press button Store to save ISN number into emulator.
5. Disconnect emulator from K-, remove JUMPER 1 and connect K output from emulator to DME(DDE) EWS .
Color: Green
Material: PCB

Package Contents:
1* EWS Immo Emulator