Sorry, this item is temporarily out of stock.
Inner Axle Side Seal Installation Tool for Dana 30/44/ Front Differentials for
Παρόμοια προϊόντα που πιστεύουμε ότι θα σου αρέσουν
Would you like us to let you know when it's back?
Περίληψη
- FUNCTION -- Helps install inner front axles seal to the proper depth. Specially designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal.
- UPGRADE DESIGN -- The different inner and outer size of the puck suitable to press on many different seals. Customized nut-full doesn't need to worry about the wrench falling off during the installation process. A must have for replace broken or bad Inner Axle Side Seal.
- EASY INSTALLATION -- Hassle-free installation.1. Place the seal into the differential axle tube, aligning puck with the seal and the flat end of the bolt; 2. Tighten the nut with a wrench until the seal is properly seated; 3. Remove the tool and the seal is installed. Do the same to the other side.
- TOP QUALITY -- Manufactured from quality steel for long tool life. Long lasting durability zinc black coating used on tool to protect them from all the dirt, oil, and grease that could potentially break down the socket quality. Corrosion-resistant, wear-resistant, and rust-resistant.
- Note: Installation guide not included, we strongly recommend you seek professional installation. Please check as much as possible to make sure the item is what you need.
Inner Axle Side Seal Installation Tool for Dana 30/44/ Front Differentials for Περιγραφή
FUNCTION -- Helps install inner front axles seal to the proper depth. Specially designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal.
UPGRADE DESIGN -- The different inner and outer size of the puck suitable to press many different seals. Customized nut-full doesn't need to worry about the wrench falling off during the installation process. A must have for replace broken or bad Inner Axle Side Seal.
EASY INSTALLATION -- Hassle-free installation.1. Place the seal into the differential axle tube, aligning puck with the seal and the flat end of the bolt; 2. Tighten the nut with a wrench until the seal is properly seated; 3. Remove the tool and the seal is installed. Do the same to the other side.
TOP QUALITY -- Manufactured from quality steel for long tool life. Long lasting durability zinc black coating used tool to protect them from all the dirt, oil, and grease that could potentially break down the socket quality. Corrosion-resistant, wear-resistant, and rust-resistant.
Note: Installation guide not included, we strongly recommend you seek professional installation. Please check as much as possible to make sure the item is what you need.
Inner Axle Side Seal Installation Tool
For Dana 30/44/ Front Differentials For VolvoGMC International
Color: As Shown
Material: Metal
Package Contents:
1x Inner Axle Side Seal Installation Tool.
Λεπτομέρειες
| OPC | PVRZFBM |
|---|---|
| Κωδικοί | 6032427023229 (EAN) |
Στοιχεία Προϊόντος
| Height | 7.2cm |
|---|---|
| Width | 7.2cm |
| Length | 23.5cm |
| Weight | 1.845kg |
| Colour | As Shown |
| Material | Metal |
Would you like us to let you know when it's back?
Inner Axle Side Seal Installation Tool for Dana 30/44/ Front Differentials for
Μπορεί επίσης να σου αρέσουν