Sorry, this item is temporarily out of stock.

NMEA 2000 N2k 5Pin to 6Pin Engine Interface Cable for Simrad B&G Navico &

Name: NMEA 2000 N2k 5Pin to 6Pin Engine Interface Cable for Simrad B&G Navico &
Brand: Torribaly
SKU: PX6CZSX
Availability: OutOfStock

Brand Torribaly

New

Παρόμοια προϊόντα που πιστεύουμε ότι θα σου αρέσουν

Διαγνωστικά εργαλεία συστήματος κινητήρα αυτοκινήτου

VAG-COM VCDS Premium Interface and Software Package28,00 €ΔΩΡΕΑΝ Παράδοση

4 in 1 Hand Held Car Refractometer Vehicle 30-35% Adblue Fluid Glycol Urea Tester Antifreeze with ATC18,88 €ΔΩΡΕΑΝ Παράδοση

Multidiag Pro TCS Bluetooth OBD2 Scanner V2021.11 Multidiag PRO Relay Car Truck Diagnostic Tool48,29 €ΔΩΡΕΑΝ Παράδοση

2025 Νέο διαγνωστικό εργαλείο Tcs-cdp/pro-plus συμβατό με V2020.3 M8 Autocom Cdp+pro Obd274,99 €ΔΩΡΕΑΝ Παράδοση

Κύριο καλώδιο δοκιμής καλωδίου OBD2 15 ακίδων για Maxisys MK808/MP808/MS90612,49 €ΔΩΡΕΑΝ Παράδοση

LAUNCH CR319 Creader Αναγνώστης κωδικών αυτοκινήτων OBD228,46 €ΔΩΡΕΑΝ Παράδοση

For BMW INPA K+CAN K+DCAN FTDI FT232RL Chip with Switch USB Interface Diagnostic Tool for BMW OBD2 Scanner38,00 €ΔΩΡΕΑΝ Παράδοση

VAG-COM VCDS Premium Interface and Software Package28,00 €ΔΩΡΕΑΝ Παράδοση

Would you like us to let you know when it's back?

Προσθήκη στο καλάθι

Περιγραφή & Λεπτομέρειες

Περίληψη

Multi-connector Compatibility:Supports a wide range of devices, including Lowrance, Simrad, B&G, Navico, and Garmin.
[Fit for Models]IP67 Engine Interface Cable Compatible with Honda outboard engine models capable of NMEA 2000 connection, including BF40D, BF50D, BF60A, BFP60A, BF75DK3, BF90DK4, BF100A, BF115D, BF135A, BF150A, BF200AK1, BF225AK1,BF200D~BF250D.
[Function]An interface cable for connecting the Engine to the NMEA 2000 network,you can view engine parameters, such as speed, temperature, oil pressure, voltage, fuel consumption, Neutral position of the gearbox,Trim position etc.
[Note]This 6-pin connectors cable is suitable for connecting engines without CommandLink Plus system,also Need to connect to NMEA 2000 network.If the network has not been installed yet, please add the NMEA 2000 starter kit for engine data display.
Note: Installation guide not included, we strongly recommend you seek professional installation. Please check as much as possible to make sure the item is what you need.

NMEA 2000 N2k 5Pin to 6Pin Engine Interface Cable for Simrad B&G Navico & Περιγραφή

Multi-connector Compatibility:Supports a wide range of devices, including , Simrad, B&G, Navico, and .
[Fit for Models]IP67 Engine Interface Cable Compatible with outboard engine models capable of NMEA 2000 connection, including BF40D, BF50D, BF60A, BFP60A, BF75DK3, BF90DK4, BF100A, BF115D, BF135A, BF150A, BF200AK1, BF225AK1,BF200D~BF250D.
[Function]An interface cable for connecting the Engine to the NMEA 2000 network,you can view engine parameters, such as speed, temperature, oil pressure, voltage, fuel consumption, Neutral position of the gearbox,Trim position etc.
[Note]This 6-pin connectors cable is suitable for connecting engines without CommandLink system,also Need to connect to NMEA 2000 network.If the network has not been installed yet, please add the NMEA 2000 kit for engine data display.
Note: Installation guide not included, we strongly recommend you seek professional installation. Please check as much as possible to make sure the item is what you need.

Connector Type: NMEA2000 N2K Engine Interface Cable
Length:1M/3.28FT
Waterproof level: IP67
Operating Temperature: -40C to 85C
This NMEA 2000 Signal Supply Cable allows you to connect a Outboard data connector to a tee a NMEA2000 network backbone. to NMEA2000 Adapter for Engine Models BF40D, BF50D, BF60A, BFP60A, BF75DK3, BF90DK4, BF100A, BF115D, BF135A, BF150A, BF200AK1, BF225AK1, BF250A, BF200D ~ 250D and BF350A.
Color: As Shown
Material: PVC
Connector A: M12 5Pin Male Connector
Connector B: Engine 6 Pin Connector

Package Contents:
1*1 meter cable + T-type connector SE