Εικόνες προϊόντος
Λυπούμαστε, αυτό το προϊόν είναι προσωρινά εκτός αποθέματος.
PH Replacement Probe with BNC Interface 300cm Cable 0-14 PH Q9 Probe Controller Oxidation-Reduction Potential Sensor
Μάρκα Torribaly
Νέο
36,29 €
Παρόμοια προϊόντα που πιστεύουμε ότι θα σου αρέσουν
Θα θέλατε να σας ενημερώσουμε πότε θα επιστρέψει;
Περιγραφή & Λεπτομέρειες
Περίληψη
- 300cm Cable PH Probe. 100% Brand new and high quality
- BNC connector, suitable for most pH meter and controller with BNC connector.
- Suitable for wide range of application: Aquariums, Hydroponics, Laboratory etc.
- Measurement range: 0.00-14.00 PH
- Caution: 1. Not suitable for testing in highly corrosive or viscous liquids, or for continuous testing in high temperature solutions. 2. Not suitable for testing low ionic concentration solutions (such as deionised or distilled water), strong alkaline solutions (pH Greater than 12) highly corrosive liquids.
PH Replacement Probe with BNC Interface 300cm Cable 0-14 PH Q9 Probe Controller Oxidation-Reduction Potential Sensor Περιγραφή
300cm Cable PH Probe. new and high quality
BNC connector, suitable Compatible?with most pH meter and controller with BNC connector.
Suitable Compatible?with wide range of application: Aquariums, Hydroponics, Laboratory etc.
Measurement range: 0.00-14.00 PH
Caution: 1. Not suitable Compatible?with testing in highly corrosive or viscous liquids, or Compatible?with continuous testing in high temperature solutions. 2. Not suitable Compatible?with testing low ionic concentration solutions (such as deionised or distilled water), strong alkaline solutions (pH Greater than 12) highly corrosive liquids.
PH Replacement Probe With BNC Interface 300cm Cable:
Our pH electrodes are designed Compatible?with pH measurements in general water such as drinking water, aquariums, fish tanks, swimming pools, hydroponics, irrigation water, scientific research, environmental monitoring, laboratories, spas, other wastewater applications Compatible?with water testing and industrial water. The standard BNC connector is compatible with any pH meter that uses a BNC connector. Measuring range: 0-14pH, 300cm cable, also features automatic temperature compensation (0-50C), which helps you to get fast and stable pH readings, as well as the ability to perform a variety of pH tests.
Ph Probe Diameter Size: 12mm
Zero-point:7 +- 0.5PH
Alkali Error:0.2PH
Theoretical Percentage Slope: greater than equal 98.5%
Internal Resistance: less than equal 250MΩ
Response : less than equal 1min
Operating Temperature:0-60
Terminal Blocks:BNC plug
Cable length:Approx. 70cm
Please check as much as possible to make sure the item is what you need.
Tips:The product may be updated constantly,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use.
Colour:As Shown
Material:PC
Package Contents:
1 * ph-201 Electrod
Λεπτομέρειες
| OPC | PYTPDT2 |
|---|---|
| Μάρκα | Torribaly |
| Κωδικοί | 4713241786829 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Στοιχεία Προϊόντος
| Height | 4cm |
|---|---|
| Width | 9cm |
| Length | 22cm |
| Weight | 0.126kg |
| Colour | As Shown |
| Material | PC |
Θα θέλατε να σας ενημερώσουμε πότε θα επιστρέψει;
PH Replacement Probe with BNC Interface 300cm Cable 0-14 PH Q9 Probe Controller Oxidation-Reduction Potential Sensor
Νέο
36,29 €
Μπορεί επίσης να σου αρέσουν