Seeed Studio XIAO ESP32-C5 Pre-Soldered Dual-Band 2.4 GHz & 5 GHz Wi-Fi 6 Dev Board Module for Zigbee Thread Matter

Seeed Studio XIAO ESP32-C5 Pre-Soldered Dual-Band 2.4 GHz & 5 GHz Wi-Fi 6 Dev Board Module for Zigbee Thread Matter Περιγραφή

First Seeed Studio XIAO with 5 GHz Wi‑Fi: Provides dual‑band Wi‑Fi 6 for cleaner spectrum access and higher throughput in 5 GHz, while maintaining 2.4 GHz compatibility.
Comprehensive connectivity: Dual‑band Wi‑Fi 6, 5 LE, and IEEE 802.15.4 provide comprehensive IoT protocol coverage, with full support for Matter, HomeKit, and MQTT.
High‑performance core: Equipped with a 32‑bit RISC‑V single‑core processor running to 240 MHz, the XIAO ESP32‑C5 integrates 384 KB ‑chip , 320 KB ROM, 8MB Flash, and 8MB PSRAM. This combination ensures smooth protocol handling, multitasking, and application scalability.
Enhanced security: Secure boot, flash encryption, and hardware cryptographic accelerators to protect firmware and data integrity.
Built‑in Battery Interface for Low‑Power Designs: Integrated battery management supporting ultra‑low‑power operation, with deep‑sleep current as low as 15 µA.

Specification:
Model: XIAO ESP32-C5
Chipest: ESP32-C5HR8
Processor: High-performance 32-bit RISC-V single-core microprocessor, to 240MHz and a low-power 32-bit RISC-V core at to 48MHz
: 384KB
RSRAM: 8MB
Flash: 8MB
Antenna: 2.4GHz FPC (2.9dBi) (same as used XIAO ESP32-C3)
Wireless Connectivity:
2.4 and 5 GHz dual-band Wi-Fi 6 (802.11ax)
5 (LE)
Zigbee
Thread (802.15.4)
Power Input:
Type-C: 5V/
Battery: 3.7V
Deep Sleep (Low Power Firmware):
USB Power Supply: 375 µA
Battery Power (BAT): 15 µA
Working Temperature: 0C ~85C
Interface:
11x GPIO Pin
1x Analog Pin + 4x Analog Pad the reverse side
1x I2C
1x UART
1x SPI
1 x JATG (Pads the reverse side)
Board:
1x User LED (Green)
1x Charge LED (Battery Charging Indicator)
1x Reset Button
1x Boot Button
1x UFL Co