TB6600 4.5A Stepper Motor Driver Board Controller Replace TB6560 Engraving Machine Single Axis Controller 10-45V
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 127,000 κριτικές με βαθμολογία « Άριστα »
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Προτεραιότητα (2,00 €) | Τρι 30 Ιουν - Σαβ 4 Ιουλ
Πωλείται από: CNNOTEPAD
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
Τα πιο δημοφιλή στο Συνδέσεις πλακέτας κυκλώματος
Περίληψη
- 1. The output current is steplessly adjustable to meet your various application needs.
- 2. Automatic semi-flow function. And it is equipped with an automatic half-flow switch, which is easy to use.
- 3. 6N137 high-speed optical coupling is used to ensure high-speed without losing step.
- 4. The subdivision setting instructions are printed on the back of the board.
- 5. Adopt enlarged radiator for good heat dissipation. With output short circuit protection function, worry-free use. Adopt common anode input mode, there are two input terminals, wiring is more convenient.
TB6600 4.5A Stepper Motor Driver Board Controller Replace TB6560 Engraving Machine Single Axis Controller 10-45V Περιγραφή
1. The output current is steplessly adjustable to meet your various application needs.
2. Automatic semi-flow function. And it is equipped with an automatic half-flow , which is easy to use.
3. 6N137 high-speed optical coupling is used to ensure high-speed without losing step.
4. The subdivision setting instructions are printed the back of the board.
5. Adopt enlarged radiator for good heat dissipation. With output short circuit protection function, worry-free use. Adopt common anode input mode, there are two input terminals, wiring is more convenient.
1) Working voltage 10V-45V. It is recommended to use a switching power supply DC32V for power supply.
2) 6N137 high-speed optical coupling is used to ensure high-speed without losing step.
3) Using 's new high-current, high-voltage TB6600HG new original chip, there are low-voltage shutdown, overheating shutdown and overcurrent protection circuits, and short circuit protection is added compared to TB6560.
4) Rated maximum output: 4.5A.
5) Suitable for 42, 57, 86 two-phase/four-phase/four-wire/six-wire stepper motors within 4.2A.
6) Automatic half-flow function.
7) Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, 16 subdivisions.
size: 50 x 82 x 35MM
Material: PCB
colour: green + silver
Package Contents:
1 x TB6600 Stepper Motor Driver Board
Λεπτομέρειες
| OPC | PTPWJQ9 |
|---|---|
| Μάρκα | Tlily |
| Κωδικοί | 4714239701060 (EAN) |
Στοιχεία Προϊόντος
| Height | 4cm |
|---|---|
| Width | 7cm |
| Length | 12cm |
| Weight | 0.114kg |
| Colour | Green & Silver |
| Material | PCB |
Σύγκρινε Πωλητές για TB6600 4.5A Stepper Motor Driver Board Controller Replace TB6560 Engraving Machine Single Axis Controller 10-45V
- Νέο από 15,67 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(446 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
13,67 €
|
+2,00 € Delivery
Εκτ. Παράδοση:
30 Ιουν - 4 Ιουλ
|
15,67 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά