Λυπούμαστε, αυτό το προϊόν είναι προσωρινά εκτός αποθέματος.

Upgrade BL- Touch V3.2 Auto Bed Leveling Sensor with 4 Brackets BL - Touch Kit Compatible?with 8 or 32 Bit Motherboard

Name: Upgrade BL- Touch V3.2 Auto Bed Leveling Sensor with 4 Brackets BL - Touch Kit Compatible?with 8 or 32 Bit Motherboard
Brand: Torribaly
SKU: PYTMTXK
Availability: OutOfStock

Μάρκα Torribaly

Νέο

Παρόμοια προϊόντα που πιστεύουμε ότι θα σου αρέσουν

Σετ εξαρτημάτων ηλεκτρικών εργαλείων

Tuya WIFI Water Level Controller Intelligent Sensors Home Water-Level Alarm Device Swimming Flows Detection System Tools75,90 €ΔΩΡΕΑΝ Παράδοση

21V 2.5 Ηλεκτρικά Ψαλίδια Κλαδέματος — Πίνακας Ελέγχου και Ελεγκτής20,39 €ΔΩΡΕΑΝ Παράδοση

Τσοκ χωρίς κλειδί για DCD797 DCD792 DCD791 DCD790 DC988K DC984KN DCD796 N145,91 €ΔΩΡΕΑΝ Παράδοση

2X 3A 250V 6mm Αδιάβροχο καλώδιο διακόπτη γραμμής IP65 Στρογγυλό σύρμα Ασημί C15,55 €ΔΩΡΕΑΝ Παράδοση

Ανταλλακτικό περιστροφικό σφυρί Carbon Brush Holder with Brushes for 2460 2470 HR2460 HR2470 HR2460F HR2470F21,28 €ΔΩΡΕΑΝ Παράδοση

Καλώδιο Φόρτισης XT60 Αρσενικό προς DC8020 Αρσενικό 16AWG για Ηλιακές Γεννήτριες6,76 €ΔΩΡΕΑΝ Παράδοση

Window Glazing Tool Kit,Glazing Shovel Paddle for Deglazing Beading,Spline Removal Hook for Windows,Doors Hand Tool Sets23,04 €ΔΩΡΕΑΝ Παράδοση

2X Ηλεκτρικό Πιστολέτο Κατεδάφισης Ανταλλακτικό Πλαστικό Λαβή για 65A25,50 €ΔΩΡΕΑΝ Παράδοση

Θα θέλατε να σας ενημερώσουμε πότε θα επιστρέψει;

Προσθήκη στο καλάθι

Περιγραφή & Λεπτομέρειες

Περίληψη

[BL-Tocuh with 4 Mounting Brakets] 3D touch with 4 mounting brakets, it can compatible with for ender 3 series, for ender 5, for ender 5 Pro, for ender 5s, for CR10, for CR10 V3 Printer. The bed leveling sensor kit includes adapter pinboard so it can be used for 8 or 32 Bit motherboard.
[Wide Application] 3D touch is equipped with new structural design for higher precision, it's Standard Deviation in repeatability is around 0.003mm,can be widely used in various FDM 3D printers and give you an enjoyable experience. BL-Touch V3.2 auto bed leveling senor is controlled by hall effect, providing high-precision. Thus the bed material can be selected freely, glasses/ wood/ metal, etc.
[2 Types Extension Cables] The auto bed leveling kit includes 2 different length cables (18cm/100cm) easy to disassembleset when the distance between your printer interface and the 3D Touch installation position is different, meet the wiring length needs of different printers.
[Smart] The push pin of the 3D Touch sensor is operated two times to test when the power is on. The LED light blinks if a problem found on a self-test or on an operation.
for ender 3 v3

Upgrade BL- Touch V3.2 Auto Bed Leveling Sensor with 4 Brackets BL - Touch Kit Compatible?with 8 or 32 Bit Motherboard Περιγραφή

[BL-Tocuh with 4 Mounting Brakets] 3D touch with 4 mounting brakets, it can compatible with Compatible?with 3 series, Compatible?with 5, Compatible?with 5 Pro, Compatible?with 5s, Compatible?with CR10, Compatible?with CR10 V3 Printer. The bed leveling sensor kit includes adapter pinboard so it can be used Compatible?with 8 or 32 Bit motherboard.
[Wide Application] 3D touch is equipped with new structural design Compatible?with higher precision, it's Standard Deviation in repeatability is around 0.003mm,can be widely used in various FDM 3D printers and give you an enjoyable experience. BL-Touch V3.2 auto bed leveling senor is controlled by hall effect, providing high-precision. Thus the bed material can be selected freely, glasses/ wood/ metal, etc.
[2 Types Extension Cables] The auto bed leveling kit includes 2 different length cables (18cm/100cm) easy to disassembleset when the distance between your printer interface and the 3D Touch installation position is different, meet the wiring length needs of different printers.
[] The push pin of the 3D Touch sensor is operated two times to test when the power is . The LED light blinks if a problem found a self-test or an operation.

Colour:As Shown
Material:Plastic

Package Contents:
1 * Leveling Sensor kit

Λεπτομέρειες