2X CC-Debugger ZigBee Simulation Programmer 2540 2541 2530 Debugging Download CC Debugger

2X CC-Debugger ZigBee Simulation Programmer 2540 2541 2530 Debugging Download CC Debugger leírása

1. CC Debugger is a small programmer and debugger for TI's low-power RF system--chip.
2. It can be used for debugging with IAR Embedded Workbench for 8051 (version 7.51A or later)
3. The SmartRF Flash Programmer can be used for flash programming.
4. CC Debugger can also be used to control selected devices in SmartRF Studio.
5. CC Debugger with USB cable 10-pin flat cable with 2.54mm connector

1. The contents of the box: CC Debugger, USB Cable, 10-pin flat cable with 2.54mm connector
2. The CC-Debugger can be used to program and debug the following 8051-based systems--chip from Texas Instruments:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
cc2543, cc2544, cc2545
3. The same devices can be controlled from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
4. It can also be used to program PurePath wireless devices:
CC8520, CC8521
CC8530, CC8531
5. CC debugger for IAR EW8051 version 7.51A or later
Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you!
Color: As Shown
Material: ABS

Package Contents:
2set x Emulator CC-Debugger