2X for SDRAM V2.2 32MB for Terasic DE10- FPGA

2X for SDRAM V2.2 32MB for Terasic DE10- FPGA leírása

This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (Greater than 512KB) of memory. Although the DE10- has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM.
So if a core requires precise memory timings, then the onboard DDR3 cannot be used.All my Extra Slim (XS) SDRAM boards have been checked under a microscope to ensure no solder bridges are present, then each board is tested at 150Mhz for at least half an hour.
Every one of my boards uses the higher quality Winbond chips, high quality KEMET branded capacitors are used each board.You can be confident knowing each Extra Slim (XS) v2.2 SDRAM board has been tested for over half an hour at 150MHz using the SDRAM Board Test Service Core . I also test each with a number of console cores in games to ensure no issues are present.
Suitable For Terasic DE10- FPGA Board

Winbond W9825G6KH-6 Chip
High Quality Capacitors
Tested For Over Half An Hour @ 150MHz
for IO Board Compatible
Fully Assembled & Tested
The appearance and color of products from different batches may vary, which does not affect their use
Colour:
Material:PCB

Package Contents:
2 x SDRAM