2X SMC02 Stepper Motor Forward and Reverse Module Control Board Pulse/Speed Control Module/Speed Display Driver Package

2X SMC02 Stepper Motor Forward and Reverse Module Control Board Pulse/Speed Control Module/Speed Display Driver Package leírása

Features: 1. Widely used.LCD display.Acceleration and deceleration control: Yes
2. Stepper motor controller + driver integrated.Input reverse connection protection: Yes; Remote communication control: TTL serial port
3. TTL serial communication.Instruction features: streamline and optimize multiple commonly used instructions
4. Automatic/manual multiple modes.Main functions of the system: automatic, manual, setting, serial port control
5. other instructions: 1. As long as it is a 2-phase 4-wire 5-wire 6-wire 8-wire stepper motor, it can be controlled.2. It can control drivers with similar interfaces.3. The number of pulses for one revolution should be determined according to the subdivision of the driver and the step angle of the stepper motor

Product parameters:
Model: ZK-SMC02 stepping motor controller + driver
Adapted motor: stepper motor
Motor signal: common cathode
Power supply range: 5-30V universal
Drive capacity: 4A
Speed range: 0.1~999 laps/minute
Cycle work times: 1-9999 times
Forward delay : 0.0-999.9 seconds
Subdivision selection range: 1-128 subdivision
Product use environment: -5-60 (non-condensing)
Notice: Electronic module products require you to have a certain electronic foundation, and read the product description carefully before use; the product is not designed, life-saving, life-saving and other purposes, and cannot be used in dangerous places such as coal mines and oil depots. We will not take any such responsibilities. Guarantee; product profits are low, users' operating capabilities and use occasions vary greatly, and any electronic equipment cannot be foolproof. The owner of the equipment should prepare corresponding protective measures and risk management plans. If the equipment directly or indirectly causes any personal or property damage, is not re