3X Automatic Irrigation Module DIY Kit Automatic Watering Module Soil Moisture Detection Automatic Water Pumping
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 126,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Kamatmentes fizetési lehetőségek elérhetők
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (Ingyenes) | kedd 16. - csüt 18. jún.
Eladó: PUPUSUN
Visszaküldés: 30 nap
180 napos fizetési védelem
Összefoglaló
- 1. Test the relay module: Connect the VCC of the relay module to 5V, connect GND to ground, connect IN to GND and the relay will jump. If IN is left floating, the relay will recover. If you repeat this, you can hear the relay's "stuck" sound.
- 2. Test the soil moisture sensor module: Connect the fork probe and the transmitter module with two Dupont lines. The transmitter module VCC is connected to 5V and GND is grounded. When powered on, the red power light is always on and the green (blue) indicator is The light flashes faintly once: insert the fork probe directly into the water, the green (blue) indicator light will turn on
- 3. Connect the red wire of the water pump to 5V, and the black wire to ground. The water pump works. Note that the test only takes 1 second. Do not expose it to the air for a long time.
- Automatic Watering DIY KIT
- Automatic Irrigation Module OIY
3X Automatic Irrigation Module DIY Kit Automatic Watering Module Soil Moisture Detection Automatic Water Pumping leírása
1. Test the relay module: Connect the VCC of the relay module to 5V, connect GND to ground, connect IN to GND and the relay will jump. If IN is left floating, the relay will recover. If you repeat this, you can hear the relay's "stuck" sound.
2. Test the soil moisture sensor module: Connect the fork probe and the transmitter module with two Dupont lines. The transmitter module VCC is connected to 5V and GND is grounded. When powered , the red power light is always and the green () indicator is The light flashes faintly once: insert the fork probe directly into the water, the green () indicator light will turn
3. Connect the red wire of the water pump to 5V, and the black wire to ground. The water pump works. Note that the test only takes 1 second. Do not expose it to the air for a long .
Due to different batches, the appearance, color and printed words of the product may vary, which will not affect the use.
Material: PCB
colour: As Shown
Package Contents:
3 x relay module
3 x Soil sensor
3 x Small water pump
3 x battery box
3 x USB power cable
3pcs x 50cm silicone hose
30 x Dupont cable
Részletek
| OPC | PTRDSSG |
|---|---|
| Márka | Semoic |
| Kódok | 4713646132535 (EAN) |
Termékadatok
| Height | 15cm |
|---|---|
| Width | 15cm |
| Length | 20cm |
| Weight | 0.3435kg |
| Colour | As Shown |
| Material | PCB |
Eladók összehasonlítása: 3X Automatic Irrigation Module DIY Kit Automatic Watering Module Soil Moisture Detection Automatic Water Pumping
- Új innen 6 708,08 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(204 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
6 708,08 Ft
|
+Free Delivery
Várható szállítás:
16-18 jún.
|
6 708,08 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el