Cashback piactér Pénzvisszatérítés minden vásárlás után Ingyenes házhozszállítás több millió termékre Magasra értékelt Kiváló értékelések a Trustpiloton Legyen Cashback VIP-tag Nagyobb visszatérítés, még jobb ajánlatok 30 napos visszaküldési lehetőség Plus Vásárlásvédelem

Sajnáljuk, ez a termék átmenetileg nincs raktáron.

495209 for Splinter Guard Replacement Strip FS-SP 5000 Ideal for Track Saw Guide Rail

Új

10 897,68 Ft

Szeretnéd, ha tudatnánk veled, ha újra elérhető lesz?

Kosárba

Leírás és részletek

Összefoglaló

Compatibility: The replacement for festool track saw accessories replace 495209 495207 festool splinter guard replacement strip and is compatible with FS/2, FS/2 KP, and FSK festool guide rails & festool track saws.
Periodically replacing your festool track saw splinter can keep your cuts perfectly splinterfree, especially if you are switching between blades, or using the festool guide rail with more than one festool track saw.
Function: You can replace the splinter guard for festool track saw accessories as needed to ensure perfect alignment of the festool guide rail with the cutting line, and to prevent tearing during parallel and lateral cutting. The new splinter guard can perfectly match the saw blade, accurately align the cutting line, and save valuable setup time.
Upgraded hard materials: The 495209 for festool splinter guard replacement stripis made of high-quality hard rubber, and uses strong adhesive, with a strong viscosity and high transparency. It can tightly adhere to your festool guide rail without falling off easily.
Easy to replace: As the splinter guard is cut into upon the first use, it reflects the exact cutting edge, meaning that it can be applied exactly at the scribe mark. You just need to remove the tape to use it. It's very simple. NOTE: You need to clean the rail with acetone and leaving surface grease free prior fitting the new splinter guard.

495209 for Splinter Guard Replacement Strip FS-SP 5000 Ideal for Track Saw Guide Rail leírása

Compatibility: The replacement for track saw accessories replace 495209 495207 splinter guard replacement strip and is compatible with FS/2, FS/2 KP, and FSK guide rails & track saws.
Periodically replacing your track saw splinter can keep your cuts perfectly splinterfree, especially if you are switching between blades, or using the guide rail with more than one track saw.
Function: You can replace the splinter guard for track saw accessories as needed to ensure perfect alignment of the guide rail with the cutting , and to prevent tearing during parallel and lateral cutting. The new splinter guard can perfectly match the saw blade, accurately align the cutting , and save valuable setup .
Upgraded hard materials: The 495209 for splinter guard replacement stripis made of high-quality hard rubber, and uses strong adhesive, with a strong viscosity and high transparency. It can tightly adhere to your guide rail without falling off easily.
Easy to replace: As the splinter guard is cut into upon the first use, it reflects the exact cutting , meaning that it can be applied exactly at the scribe mark. You just need to remove the tape to use it. It's very simple. NOTE: You need to clean the rail with acetone and leaving surface grease free prior fitting the new splinter guard.

Color: As Shown
Material: plastic

Package Contents:
1*splinter guard strip

Részletek