5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 130,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Kamatmentes fizetési lehetőségek elérhetők
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (1 576,82 Ft) | csüt 6. - kedd 11. aug.
Visszaküldés: 30 nap
180 napos fizetési védelem
Összefoglaló
- The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
- You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
- This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
- Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
- Microphone Module
5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi leírása
The microphone is a single mono element. You can select whether you want it to be the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick two microphones!
You can set them to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it ! This microphone is best used with Cortex M-series chips like the for Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Color:
Material: Plastic+Metal
Package Contents:
5 x Microphone Module
Részletek
| OPC | PWKGZG6 |
|---|---|
| Márka | ISTOVO |
| Kódok | 6033420972613 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 5cm |
|---|---|
| Width | 1cm |
| Length | 1cm |
| Weight | 0.0075kg |
| Colour | Blue |
| Material | Plastic+Metal |
Eladók összehasonlítása: 5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
- Új innen 14 167,96 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(80 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
12 591,14 Ft
|
+1 576,82 Ft Delivery
Várható szállítás:
6-11 aug.
|
14 167,96 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el