Electric Chisel + 5 Knives + Open Wrench Engraving Tools Engraving Chisel Engraving Pen
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 129,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Kamatmentes fizetési lehetőségek elérhetők
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (1 576,82 Ft) | pén 31. júl. - sze 5. aug.
Eladó: JJBRDZ
Visszaküldés: 30 nap
180 napos fizetési védelem
Legnépszerűbb termékek a(z) Gravírozó szerszámok kategóriában
Összefoglaló
- 1. This product can only be used with machines with flexible shafts such as desktop polishing machine, hanging mill, electric drill, electric mill, etc. Be sure to install it on the right side of the table grinder, or the flexible shaft will be damaged in the opposite direction
- 2 After 10 minutes of use, the machine must be shut down for 2-3 minutes to avoid overheating of the product, and it can be reused after the machine is completely cooled
- 3. This product can only carve the surface of the material, and the cutting angle should be controlled at 15-20 degrees. The angle should not be too large or even vertical
- Color: as shown
- Material: high carbon steel
Electric Chisel + 5 Knives + Open Wrench Engraving Tools Engraving Chisel Engraving Pen leírása
1. This product can only be used with machines with flexible shafts such as desktop polishing machine, hanging mill, electric drill, electric mill, etc. Be sure to install it the right side of the table grinder, or the flexible shaft will be damaged in the opposite direction
2 After 10 minutes of use, the machine must be shut down for 2-3 minutes to avoid overheating of the product, and it can be reused after the machine is completely cooled
3. This product can only carve the surface of the material, and the cutting angle should be controlled at 15-20 degrees. The angle should not be too large or even vertical
Color: as shown
Material: high carbon steel
Package Contents:
1 x Electric Chisel
5 x Knives
1 x Open Wrench
Részletek
| OPC | PVP7QW5 |
|---|---|
| Márka | Torribaly |
| Kódok | 4712426431707 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 4cm |
|---|---|
| Width | 11cm |
| Length | 20cm |
| Weight | 0.222kg |
| Colour | as shown |
| Material | high carbon steel |
Eladók összehasonlítása: Electric Chisel + 5 Knives + Open Wrench Engraving Tools Engraving Chisel Engraving Pen
- Új innen 7 038,75 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(447 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
5 461,93 Ft
|
+1 576,82 Ft Delivery
Várható szállítás:
31 júl. - 5 aug.
|
7 038,75 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el