TMC2209 V4.0 Stepper Motor Driver Quiet Operation for 3D Printers, 5.5-28V 2.8A with Heatsink, Enhanced Microsteps
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 135,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (Ingyenes) | pén 9. - sze 14. okt.
Eladó: Papishop
Visszaküldés: 30 nap
180 napos fizetési védelem
Összefoglaló
- Optimized Performance: The TMC2209 V4.0 stepper motor driver ensures quiet and precise operation, ideal for 3D printing applications. It supports a voltage range of 5.5-28V and current up to 2.8A, making it versatile for various setups.
- Advanced Microstepping: This driver enhances microstepping capabilities, providing smoother and more accurate prints. The inclusion of a heatsink effectively dissipates heat, prolonging the life of the driver and maintaining optimal performance.
- Quiet Operation: Designed with stealthChop2 technology, the TMC2209 V4.0 offers ultra-quiet stepper motor performance, crucial for reducing noise in shared spaces or during late-night printing sessions.
- Hardware compatible with StepStick and Pololu A4988
- Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
TMC2209 V4.0 Stepper Motor Driver Quiet Operation for 3D Printers, 5.5-28V 2.8A with Heatsink, Enhanced Microsteps leírása
Optimized Performance: The TMC2209 V4.0 stepper motor driver ensures quiet and precise operation, ideal for 3D printing applications. It supports a voltage range of 5.5-28V and current to 2.8A, making it versatile for various setups.
Advanced Microstepping: This driver enhances microstepping capabilities, providing smoother and more accurate prints. The inclusion of a heatsink effectively dissipates heat, prolonging the life of the driver and maintaining optimal performance.
Quiet Operation: Designed with stealthChop2 technology, the TMC2209 V4.0 offers ultra-quiet stepper motor performance, crucial for reducing noise in shared spaces or during late-night printing sessions.
Hardware compatible with StepStick and Pololu A4988
Drive capability to 1.7A (RMS) continuous coil current - 2.8A
Step/Dir interface with microstep interpolation ( to 256 microsteps)
Configuration via CFG pins or UART interface
Motor voltage: 5.5...28V
Logic voltage: 3.3...5V
RSense: 0.11 Ohm
stealthChop2 - for quiet operation and smooth motion
spreadCycle - highly dynamic motor control chopper (enableable via UART, OTP, CFG Pin)
coolStep - current control for savings
stallGuard4 - sensorless motor load detection
Colour:As shown
Material:PCB
Due to different product batches, the appearance may vary, which does not affect the use
Package Contents:
1 * Stepper Motor Driver kit
Részletek
| OPC | PVNP5XB |
|---|---|
| Márka | Typecat |
| Kódok | 4712988082393 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 2cm |
|---|---|
| Width | 5cm |
| Length | 8cm |
| Weight | 0.008kg |
| Colour | As Shown |
| Material | PCB |
Eladók összehasonlítása: TMC2209 V4.0 Stepper Motor Driver Quiet Operation for 3D Printers, 5.5-28V 2.8A with Heatsink, Enhanced Microsteps
- Új innen 6 831,96 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(436 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
6 831,96 Ft
|
+Free Delivery
Várható szállítás:
9-14 okt.
|
6 831,96 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el