WIFI PP2000 LEXIA3 DIAGBOX V9.85 for for Installed Version PP 2000 Auto Diagnostic Tools Lexia 3

WIFI PP2000 LEXIA3 DIAGBOX V9.85 for for Installed Version PP 2000 Auto Diagnostic Tools Lexia 3 leírása

DIAG BOX V9.85 Important note: (The old K- before 2000 does not support it) The vehicle coverage is approximately 2005-
Important reminder: Standard configuration V7.83 and V9.85 software. V7.83 is installed WIN732-bit systems, while V9.85 can be installed WIN7 and WIN10. (Both versions of the software support for and for )
Features supported by Lexia 3 PP2000: Different from other scanning tools that only read fault codes; This software performs almost all functions similar to the old diagnostic tool. Our diagnostic interfaces include CAN multiplexers, CAN-BUS interfaces, and SAE J1850 buses.
Read Identification Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc.
Read Fault Codes Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").Program supports report printing or copy to clipboard.

Clear Fault Codes - This function clears all stored fault codes and other diagnostic information.
Auto-Scan (Complete Car Scan/Test) - Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values - Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, et
Car coverage:
1. P2000,Lexia 3 is compatible with most for cars from 2005.
2. PP2000, Lexia-3 is implemented through the OBD II connector (located near the steering wheel) or manufacturer specific connector (only for vehicles after 2005)
For
C-Zero/C1/C2/C3/C3 /DS3/C-ELYSEE/C4/C4 CACTUS/ C4 /DS4/ 5LS/C5/DS5/C6/C8/C-CROSSER/C4 AIRCROSS/NEMO/BERLINGO/JUMPY/JUMPER/AX/SAXO/BX/ZX/XSARA/XANTIA/XM/EVASION/C15/FUKANGFUKANG 988/ELYSEE/C-ELYSEE(R3)/C-TRIOMPHE/C-QUATRE
For